IC-PQ2-PMCb PMC is an high integrated module with single board computer functionalities. This rugged PMC board is intended for embedded application with specifi c needs of conduction-cooled systems. This card has been designed in accordance with ANSI Vita 20 and IEEE1386.1
PCI mezzanine card standard. It features a high performance 32-bits PowerPC processor with three Fast Ethernet controllers.
IC-PQ2-PMCb can be used in conjunction with Compact- PCI, VME carriers or proprietary design. Many networks or embedded applications can be developed on-board : Processor module with a need of high level of integration and low power consumption.Communication controller with Multi-Ethernet Links.Ethernet channels with redundancy.
處理器核
PPC603e with FPU 32 bits RISC架構帶有 :266MHz CPU
16KB 指令 Cache 和 16KB 數據Cache.
64KB 板上雙端口 SRAM.
MMU 和 FPU
DMA通道控制器
64 or 128MB 共享DRAM帶有ECC.
128KB SRAM
8 or 32 MB of Nor Flash EPROM.
32KB SPI EEPROM
實時時鐘和432 bit-timers.
PCI 接口啟動, 目標機 & 主機t:
32 bits @ 33 MHz
3.3V only PCI signaling Rev 2.2.
I/O subsystem
3個Ethernet 10/100TX接口,通過后背板
I/O Pn4 和Pn3連接器 :
4*多功能串行控制器 SCC[1..4].
Physical dimensions
143.75*74mm, stacking height 10mm.
Power requirements
3.3VDC only with less than 3 W for maximum confi guration.
EM compatibility
EMC/EMI : 89/336/ECC, EN55022 ClE, EN50082-2.
PowerPC embedded core
372 MIPS and 6,6SPEC95 @ 266MHZ.
FPU, MMU, 16KB IC & 16KB ID.
64 KB internal SRAM.
SDRAM
64 or 128 MB 64-bits wide with ECC.
Power management with self-refresh.
Fast access 10ns (6.1.1.1).
Flash or EEprom
8/32MB Mirror-NOR Flash.
32KB of EEPROM on the SPI bus.
SRAM
128 KB
DMA controller
4 virtual independent channels.
8, 16, 32 bits peripheral support.
Scatter/gather with command/data chaining.
Transfers supported include: PCI, memory, internal I/O.
PCI interface
32-bit, 33MHz PCI version 2.2 compatible.
Signalization 3.3VDC only.
A poll of read and write buffers.
PCI host bridge and peripheral capabilities.
Monarch, Non-Monarch or stand-alone mode.
4 independent DMA channels.
I2O standard
Ethernet Port
Compliant with IEEE802.3, 802.3u, 802.3x.
10/100Base TX auto-sensing.
Surge protection
Other on-board functions
Temperature sensor usable via the SPI bus.
I2C bus, SCC signals and multipurpose I/O on PMC I/O.
On-board DC/DC generation .
Optional calendar clock and supercap for backuped SRAM.
Debug Ports via Engineering kit
RS232 serial link based on SMC UART.
JTAG - COP
BSP for VxWorks® and Linux® operating systems.Other RTOS (LynxOS,...) can be ported on request