流量計LEONARD Rotary Cam Switch LNSW

LEONARD    Rotary Cam  Switch   LNSW    凸輪開關

MODBUS RTU, Master/Slave, and ASCII In/Out. Inputs: 20 AC inputs, 90-120 VAC, 5 isolated commons (4 inputs per common). Outputs: 16 AC outputs, 17-240 VAC, 0.5A/point max., 4 isolated commons (4 points per common). Four option slots available for I/O or communication modules. 流量計LEONARD    Rotary Cam  Switch   LNSW  
D0-06DD1    DL06 CPU, 20 DC in / 16 DC out, requires external 110-220 VAC power, includes 300mA 24VDC auxiliary device power supply. 14.8k words total (7679 words ladder - flash, 7488 words V-memory), RLL/RLLPLUS programming (DirectSOFT32 Version 4.0 or higher), two built-in RS-232C communication ports. Secondary communications port supports RS-232C/RS-422/RS-485, DirectNET Master/Slave, MODBUS RTU, Master/Slave, and ASCII In/Out. Inputs: 20 DC inputs, 12-24 VDC current sinking/sourcing, 5 isolated commons (4 inputs per common). First 4 inputs are configurable in one of several high-speed I/O features such as 7KHz counter input, pulse catch input, or interrupt input (not available when using pulse output). Outputs: 16 DC outputs, 12-24 VDC current sinking, 1.0A/point max., 4 isolated commons (4 points per common). 2 outputs are configurable for independent CW/CCW pulse train output or step and direction pulse output up to 10kHz (0.5A/point) (not available when using high-speed inputs). Four option slots available for I/O or communication modules.
D0-06DD2    DL06 CPU, 20 DC in / 16 DC out, requires external 110-220 VAC power, includes 300mA 24VDC auxiliary device power supply. 14.8k words total (7679 words ladder - flash, 7488 words V-memory), RLL/RLLPLUS programming (DirectSOFT32 Version 4.0 or higher), two built-in RS-232C communication ports. Secondary communications port supports RS-232C/RS-422/RS-485, DirectNET Master/Slave, MODBUS RTU, Master/Slave, and ASCII In/Out. Inputs: 20 DC inputs, 12-24 VDC current sinking/sourcing, 5 isolated commons (4 inputs per common). First 4 inputs are configurable in one of several high-speed I/O features such as 7KHz counter input, pulse catch input, or interrupt input (not available when using pulse output). Outputs: 16 DC outputs, 12-24 VDC current sourcing 1.0A/point max., 4 isolated commons (4 points per common). 2 outputs are configurable for independent CW/CCW pulse train output or step and direction pulse output up to 10kHz (0.5A/point) (not available when using high-speed inputs). Four option slots available for I/O or communication modules.
D0-06DR    DL06 CPU, 20 DC in / 16 Relay out, requires external 110-220 VAC power, includes 300mA 24VDC auxiliary device power supply. 14.8k words total (7679 words ladder - flash, 7488 words V-memory), RLL/RLLPLUS programming (DirectSOFT32 Version 4.0 or higher), two built-in RS-232C communication ports. Secondary communications port supports RS-232C/RS-422/RS-485, DirectNET Master/Slave, MODBUS RTU, Master/Slave, and ASCII In/Out. Inputs: 20 DC inputs, 12-24 VDC current  流量計LEONARD    Rotary Cam  Switch   LNSW  sinking/sourcing, 5 isolated commons (4 inputs per common). First 4 inputs are configurable in one of several high-speed I/O features such as 7KHz counter input, pulse catch input, or interrupt input. Outputs: 16 relay outputs, 6-27 VDC, 6-240 VAC, 2A/point max., 4 isolated commons (4 points per common). Four option slots available for I/O or communication modules.
D0-06DA    DL06 CPU, 20 DC in / 16 AC out, requires external 110-220 VAC power, includes 300mA 24VDC auxiliary device power supply. 14.8k words total (7679 words ladder - flash, 7488 words V-memory), RLL/RLLPLUS programming (DirectSOFT32 Version 4.0 or higher), two built-in RS-232C communication ports. Secondary communications port supports RS-232C/RS-422/RS-485, DirectNET Master/Slave, MODBUS RTU, Master/Slave, and ASCII In/Out. Inputs: 20 DC inputs, 12-24 VDC current sinking/sourcing, 5 isolated commons (4 inputs per common). First 4 inputs are configurable in one of several high-speed I/O features such as 7kHz counter input, pulse catch input, or interrupt input. Outputs: 16 AC outputs, 17-240 VAC, 0.5A/point max., 4 isolated commons (4 points per common). Four option slots available for I/O or communication modules.
D0-06AR    DL06 CPU, 20 AC in / 16 Relay out, requires external 110-220 VAC power, includes 300mA 24VDC auxiliary device power supply. 14.8k words total (7679 words ladder - flash, 7488 words V-memory), RLL/RLLPLUS programming (DirectSOFT32 Version 4.0 or higher), two built-in RS-232C communication ports. Secondary communications port supports RS-232C/RS-422/RS-485, DirectNET Master/Slave, MODBUS RTU, Master/Slave, and ASCII In/Out. Inputs: 20 AC inputs, 90-120 VAC, 5 isolated commons (4 inputs per common). Outputs: 16 relay outputs, 6-27 VDC, 6-240 VAC, 2A/point max., 4 isolated commons (4 points per common). Four option slots available for I/O or communication modules.
D0-06DD1-D    DL06 CPU, 20 DC in / 16 DC out, requires external 12-24 VDC power. 14.8k words total (7679 words ladder - flash, 7488 words V-memory), RLL/RLLPLUS programming (DirectSOFT32 Version 4.0 or higher), two built-in RS-232C  流量計LEONARD    Rotary Cam  Switch   LNSW  communication ports. Secondary communications port supports RS-232C/RS-422/RS-485, DirectNET Master/Slave, MODBUS RTU, Master/Slave, and ASCII In/Out. Inputs: 20 DC inputs, 12-24 VDC current sinking/sourcing, 5 isolated commons (4 inputs per common). First 4 inputs are configurable in one of several high-speed I/O features such as 7KHz counter input, pulse catch input, or interrupt input (not available when using pulse output). Outputs: 16 DC outputs, 12-24 VDC current sinking, 1.0A/point max., 4 isolated commons (4 points per common). 2 outputs are configurable for independent CW/CCW pulse train output or step and direction pulse output up to 10kHz (0.5A/point) (not available when using high-speed inputs). Four option slots available for I/O or communication modules.
D0-06DD2-D    DL06 CPU, 20 DC in / 16 DC out, requires external 12-24 VDC power. 14.8k words total (7679 words ladder - flash, 7488 words V-memory), RLL/RLLPLUS programming (DirectSOFT32 Version 4.0 or higher), two built-in RS-232C communication ports. Secondary communications port supports RS-232C/RS-422/RS-485, DirectNET Master/Slave, MODBUS RTU, Master/Slave, and ASCII In/Out. Inputs: 20 DC inputs, 12-24 VDC current sinking/sourcing, 5 isolated commons (4 inputs per common). First 4 inputs are configurable in one of several high-speed I/O features such as 7KHz counter input, pulse catch input, or interrupt input (not available when using pulse output). Outputs: 16 DC outputs, 12-24 VDC current sourcing, 1.0A/point max., 4 isolated commons (4 points per common). 2 outputs are configurable for independent CW/CCW pulse train output or step and direction pulse output up to 10kHz (0.5A/point) (not available when using high-speed inputs). Four option slots available for I/O or communication modules.
D0-06DR-D    DL06 CPU, 20 DC in / 16 Relay out, requires external 12-24 VDC power. 14.8k words total (7679 words ladder - flash, 7488 words V-memory), RLL/RLLPLUS programming (DirectSOFT32 Version 4.0 or higher), two built-in RS-232C communication ports. Secondary communications port supports RS-232C/RS-422/RS-485, DirectNET Master/Slave, MODBUS RTU, Master/Slave, and ASCII In/Out. Inputs: 20 DC inputs, 12-24 VDC current sinking/sourcing, 5 isolated commons (4 inputs per common). First 4 inputs are configurable in one of several high-speed I/O features such as 7kHz counter input, pulse catch input, or interrupt input. Outputs: 16 Relay outputs, 6-27 VDC, 6-240 VAC, 2A/point max., 4 isolated commons (4 points per common). Four option slots available for I/O or communication modules.
D0-06USER-M    DL06 CPUs are covered in the DL06 User Manual, including the D0-06LCD display panel. Note: Analog and discrete option card modules are included in the D0-OPTIONS-M Manual. Manuals are not included with the product (unless specified). 
DL0discnotes    DL05/06 Discrete I/O Modules
D0-10ND3    10-point 12-24 VDC current sinking/sourcing input module, 2 isolated commons (5 pts. per common), removable terminal
D0-10ND3F    10-point 12-24 VDC current sinking/sourcing, input module, fast response, 2 isolated commons (5 pts. per common), removable terminal
F0-08NA-1    8-point 110VAC input module, 1 common (2 common terminals), removable terminal block
D0-10TD1    10-point 12-24 VDC current sinking output module, 2 commons non-isolated (5 pts. per common), 0.3A/point, 1.5A/common, removable terminal, no fuse 
D0-10TD2    10-point 12-24 VDC current sourcing output module, 2 commons non-isolated (5 pts. per common), 0.3A/point, 1.5A/common, removable terminal, no fuse 
D0-08TR    8-point 6-27 VDC or 6-240 VAC relay output module, 8 Form A (SPST) relays, 2 isolated commons, 1A/point, 4A/common, removable terminal   
F0-04TRS    4-point 5-30 VDC or 5-125 VAC isolated relay output module, 2 Form A (SPST) relays, 2 Form C (SPDT) relays, 4 isolated commons, 3A/point, replaceable fuse, removable terminal block.
D0-08CDD1    4-point 12-24 VDC current sinking/sourcing input, 1 common, 4-point 12-24 VDC sinking output,  0.3A/point, 1.2A/module, removable terminal, no fuse
D0-07CDR    4-point 12-24 VDC current sinking/sourcing input, 1 common, 3-point relay output, 3 Form A (SPST) relays 1A/pt., 3A/module, 1 common, no fuse   
D0-16ND3    16-point 20-28 VDC current sinking/sourcing input module, 4 isolated commons (4 pts. per common). One pre-wired ZIPLink cable ( 0.5 meter) and terminal block connector module required for this I/O module. See Compatibility Matrix in the ZIPLink technical section to choose cable and connector module.
D0-16TD1    16-point 6-27 VDC current sinking output module, 2 isolated commons, 8 points per common, 0.1A/point, 0.8A/common, no fuse.  One pre-wired ZIPLink cable ( 0.5 meter) and terminal block connector module required for this I/O module. See Compatibility Matrix in the ZIPLink technical section to choose cable and connector module.
D0-16TD2    16-point 12-24 VDC current sourcing output module, 2 commons non-isolated (8 pts. per common), 0.1A/point, 0.8A/common, no fuse.  One pre-wired ZIPLink cable ( 0.5 meter) and terminal block connector module required for this I/O module. See Compatibility Matrix in the ZIPLink technical section to choose cable and connector module.
F0-08SIM    8-point input simulator module for DL05 and DL06 PLCs
DL0ananotes    DL05/06 Analog I/O Modules
F0-04AD-1    4-channel analog input module, 12-bit resolution, range: 4-20 mA or 0-20 mA
F0-04AD-2    4-channel analog input module, 12-bit resolution, range: 0-5V or 0-10V
F0-2AD2DA-2    2-channel analog input and 2-channel analog output module, 12-bit resolution, range: 0-5V or 0-10V
F0-4AD2DA-1    4-channel analog input and 2-channel analog output module (current sourcing), 12-bit resolution, range: 0-20 mA or 4-20 mA
F0-4AD2DA-2    4-channel analog input and 2-channel analog output module, 12-bit resolution, range: 0-5V or 0-10V
F0-08ADH-1    8-channel analog input module for DL05/06 PLCs, range: 0-20 mA current input at 16-bit resolution
F0-08ADH-2    8-channel analog input module for DL05/06 PLCs, range: 0-5V or 0-10V voltage input at 16-bit resolution
F0-08DAH-1    8-channel analog output module for DL05/06 PLCs, range: 4-20 mA current output at 16-bit resolution
F0-08DAH-2    8-channel analog output module for DL05/06 PLCs, range: 0-10V voltage output at 16-bit resolution
F0-04DAH-1    4-channel analog output module for DL05/06 PLCs, range: 4-20 mA current output at 16-bit resolution
F0-04DAH-2    4-channel analog output module for DL05/06 PLCs, range: 0-10V voltage output at 16-bit resolution
DL0tempnotes    DL05/06 temperature input modules
F0-04THM    4-channel thermocouple input module, 0.1 degrees Celsius or Fahrenheit resolution, supports: J, E, K, R, S, T, B, N, C type thermocouples; 0-39.0625 mV, +/-39.0625 mV, +/-78.125 mV, 0-156 mV, +/-156 mV, and 0-1.25V at 16-bit resolution. 
F0-04RTD    4-channel RTD input module, 0.1 degrees C resolution, supports: Pt100, jPt100, Pt1000, Cu10, Cu25, Ni120.
D0-OPTIONS-M    All DL05/06 I/O option modules (except D0-DEVNETS, H0-ECOM, H0-PSCM and H0-CTRIO) are covered in the DL05/06 Option Module Manual. Order manual separay.
DL05commnotes    DL05/06 Communications Modules and Accessories
H0-ECOM100    DL05/06 Ethernet Communications module, supports master/slave communication, 10/100 Mbps with auto-detect, supports TCP/IP, UDP/IP, IPX and Modbus TCP application layer protocol?
DL0sernotes    DL05/06 serial communications module
D0-DCM    DL05/06 Data Communications module, 2-port serial RS-232/422/485. Port 1: modular RJ12, RS-232C, DirectNet/K-Sequence/Modbus RTU (slave only). Port 2: HD15 D-shell connector, RS-232C and RS-422/485, DirectNet and Modbus RTU (Master / Slave), K-Sequence (slave only) and non-sequence protocols
D0-DCM-M    2-port Data Communications module manual covers the DCM for the DL05 and DL06. Order manual separay. 
D0-CBL    12 ft. (3.66m) RS232 shielded networking cable without RTS connections for CLICK, DL05, D2-240, D4-450, and Productivity3000 RJ12 networking ports.  RJ12 6P6C to RJ12 6P6C connectors. Enables simple RS-232C networking of TWO of the listed PLCs.
DA-DNET-M    DirectNET Protocol manual for DL05/DL06/DL205/DL305/DL405
DL06spnotes    DL06 Specialty Modules
D0-06LCD    DL06 LCD display, 16 characters x 2 rows with backlight, 7 function keys.  Installs into any model DL06 PLC; display single bit, 16 bit, or 32 bit I/O or V-memory registers, scan time, PLC mode, system errors, display/change clock calender or user V-memory ranges for setpoints, along with user programmable display and data entry messages.  Password protection capable for clock/calendar setup and data value changes in user V-memory registers. LCD programming configured using DirectSOFT programming software version 4.0 or later; D2-HPP LCD programming not supported. Installation and operation covered in the D0-06USER-M, ordered separay.
DL0hspnotes    DL05/06 high speed counter
H0-CTRIO2    High-speed counter interface module for DL05/06 PLCs. (4) 9-30 VDC sink/source inputs, (2) 5-36 VDC isolated sink/source outputs, 0.5A per point. Inputs supported: 1 quadrature encoder counter up to 250kHz, or 2 single-channel counters up to 250kHz, and 2 high speed discrete inputs for Reset, Inhibit, or Capture. Outputs supported: 2 independently configurable high-speed discrete outputs or 1 channel pulse output control, 20Hz-250kHz per channel, pulse and direction or CW/CCW pulses. Must use with CTRIO Workbench v2.2.0 or higher.
DL0copnotes    DL05/06 coprocessor module
F0-CP128    Triple port Overdrive CoProcessor module. 128k battery-backed RAM, 100MHz clock speed, two physical ports. One RJ12 jack, 6-pin 6P6C cable with splitter, Port 1: RS-232, 512K baud max. and Port 3: RS-232, 115.2K baud max. and one removable 3-pin terminal block, Port 2 : RS-485, 512K baud max. Includes CD containing ABM Commander for Windows and DOS and example programs.
DL0devnotes    DL05/06 DeviceNet slave module
D0-DEVNETS    DeviceNet communication slave module for connection to a DeviceNet master. Includes standard DeviceNet 5-position removable terminal (European style)
D0-DEVNETS-M    D0-DEVNETS DeviceNet Slave module manual. Order manual separay.
DL0pronotes    DL05/06 Profibus Slave module
H0-PSCM    Profibus DL05/06 Slave Communication module. Supports Profibus DP up to 10 Mbps connection to Profibus Master controllers. This module can be configured to allocate up to four blocks of I/O or register memory from the DL05/06 PLC to the connected Profibus DP Master.  Each memory block can range in size from 1 byte to 64 bytes and can be either input or output memory. Requires ERNI communications connectors listed in DL05/06 Spare Parts and Accessories section of the Price List.
HX-PSCM-M    Profibus Slave Communications manual for H0-PSCM module. Order manual separay.
DL06sparenotes    DL06 Spare Parts and Accessories
D0-ACC-2    DL06 replacement terminal blocks, terminal block covers, terminal block labels and short bar, qty. (2) of each per package plus (1) short bar
D0-ACC-3    DL06 replacement option card covers (qty. 4), option card top covers (qty. 4), LCD cover (qty. 1), and lower access panel cover (qty. 1)
D0-06ADPTR    DL06 15-pin high density D-sub vertical adapter for DL06 port 2 serial communication port
DL0506sparenotes    DL05/06 Spare Parts and Accessories
F0-IOCON-THM    DL05/06 replacement terminal block for F0-04THM including CJC sensor (qty. 1).
D0-ACC-4    DL05/06 discrete and analog I/O module replacement terminal blocks, 10-position and 13-position, qty. 2 each
F0-IOCON    DL05/06 replacement terminal blocks, 8-position, for the F0-04AD-1, F0-04AD-2, F0-2AD2DA-2, F0-4AD2DA-1, F0-4AD2DA-2 and H0-CTRIO option modules (qty. 2)
DL105notes    DL105 PLC Units
F1-130AA    DL105 CPU, 10 AC in / 8 AC out, requires external 110-220V power (94-240 VAC @ 30VA max., 100-240 VDC @ 30W max.), includes 500mA 24VDC auxiliary device power supply. 2.4K words total (2048 words ladder - EEPROM, 384 words V-memory), RLL/RLLPLUS programming, built-in RS232C programming port. Inputs: 10 AC inputs, 80-132 VAC or 90-150 VDC, 3 isolated commons. Outputs: 8 AC outputs, 20-140 VAC, 1.7A/pt., 4 isolated commons.
F1-130AD    DL105 CPU, 10 AC in / 8 DC out, requires external 110-220V power (94-240 VAC @ 30VA max., 100-240 VDC @ 30W max.), includes 500mA 24VDC auxiliary device power supply. 2.4K words total (2048 words ladder - EEPROM, 384 words V-memory), RLL/RLLPLUS programming, built-in RS232C programming port. Inputs: 10 AC inputs, 80-132 VAC or 90-150 VDC, 3 isolated commons. Outputs: 8 DC outputs, 5-30 VDC current sinking, 0.5A/pt. max, 3 internally connected commons. 2 outputs are configurable for independent CW/CCW pulse train output or step and direction pulse output up to 7kHz (@ 0.25A/pt. max).
F1-130AR    DL105 CPU, 10 AC in / 8 Relay out, requires external 110-220V power (94-240 VAC @ 30VA max., 100-240 VDC @ 30W max.), includes 500mA 24VDC auxiliary device power supply. 2.4K words total (2048 words ladder - EEPROM, 384 words V-memory), RLL/RLLPLUS programming, built-in RS232C programming port. Inputs: 10 AC inputs, 80-132 VAC or 90-150 VDC, 3 isolated commons. Outputs: 8 relay outputs, 12-30 VDC, 12-250 VAC, 7A/pt. max. or 30-150 VDC, 0.5A resistive/pt. max., 4 isolated commons.
F1-130DA    DL105 CPU, 10 DC in / 8 AC out, requires external 110-220V power (94-240 VAC @ 30VA max., 100-240 VDC @ 30W max.), includes 500mA 24VDC auxiliary device power supply. 2.4K words total (2048 words ladder - EEPROM, 384 words V-memory), RLL/RLLPLUS programming, built-in RS232C programming port. Inputs: 10 DC inputs, 12-24 VDC current sinking/sourcing, 3 isolated commons. First 4 inputs are configurable in one of several high-speed I/O features such as 5kHz counter input, pulse catch input, or interrupt input. Outputs: 8 AC outputs, 20-140 VAC, 1.7A/pt. max, 4 isolated commons.
F1-130DD    DL105 CPU, 10 DC in / 8 DC out, requires external 110-220V power (94-240 VAC @ 30VA max., 100-240 VDC @ 30W max.), includes 500mA 24VDC auxiliary device power supply. 2.4K words total (2048 words ladder - EEPROM, 384 words V-memory), RLL/RLLPLUS programming, built-in RS232C programming port. Inputs: 10 DC inputs, 12-24 VDC current sinking/sourcing, 3 isolated commons. First 4 inputs are configurable in one of several high-speed I/O features such as 5kHz counter input, pulse catch input, or interrupt input (not available when using pulse output). Outputs: 8 DC outputs, 5-30 VDC current sinking, 0.5A/pt. max, 3 internally connected commons. 2 outputs are configurable for independent CW/CCW pulse train output or step and direction pulse output up to 7kHz (@ 0.25A/pt. max) (not available when using high-speed inputs). 
F1-130DR    DL105 CPU, 10 DC in / 8 relay out, requires external 110-220V power (94-240 VAC @ 30VA max., 100-240 VDC @ 30W max.), includes 500mA 24VDC auxiliary device power supply. 2.4K words total (2048 words ladder - EEPROM, 384 words V-memory), RLL/RLLPLUS programming, built-in RS232C programming port. Inputs: 10 DC inputs, 12-24 VDC current sinking/sourcing, 3 isolated commons. First 4 inputs are configurable in one of several high-speed I/O features such as 5kHz counter input, pulse catch input, or interrupt input. Outputs: 8 relay outputs, 12-30 VDC, 12-250 VAC, 7A/pt. max. or 30-150 VDC, 0.5A resistive/pt. max., 4 isolated commons.
F1-130DD-D    DL105 CPU, 10 DC in / 8 DC out, requires external 12-24 VDC power. 2.4K words total (2048 words ladder - EEPROM, 384 words V-memory) RLL/RLLPLUS programming, built-in RS232C programming port. Inputs: 10 DC inputs, 12-24 VDC current sinking/sourcing, 3 isolated commons. First 4 inputs are configurable in one of several high-speed I/O features such as 5kHz counter input, pulse catch input, or interrupt input (not available when using pulse output). Outputs: 8 DC outputs, 5-30 VDC current sinking, 0.5A/pt. max, 3 internally connected commons. 2 outputs are configurable for independent CW/CCW pulse train output or step and direction pulse output up to 7kHz (@ 0.25A/pt. max) (not available when using high-speed inputs). 
F1-130DR-D    DL105 CPU, 10 DC in / 8 relay out, requires external 12-24 VDC power. 2.4K words total (2048 words ladder - EEPROM, 384 words V-memory) RLL/RLLPLUS programming, built-in RS232C programming port. Inputs: 10 DC inputs, 12-24 VDC current sinking/sourcing, 3 isolated commons. First 4 inputs are configurable in one of several high-speed I/O features such as 5kHz counter input, pulse catch input, or interrupt input. Outputs: 8 relay outputs, 12-30 VDC, 12-250 VAC, 7A/pt. max. or 30-150 VDC, 0.5A resistive/pt. max., 4 isolated commons.
D1-USER-M    All DL105 CPUs are covered in the DL105 User Manual. Order manual separay.
DL105sparenotes    DL105 Spare Parts and Specialty Items
F1-04SIM    4-point input simulator. Quickly connects to input terminals. (On DC input versions only)
F1-IOCON    I/O terminal blocks (qty. 4)
F1-IOCVR    I/O terminal block covers (qty. 4)
DL2CPUnotes    DL205 CPUs
D2-260    DirectLOGIC 205 series PLC CPU module, 30.4k words total (15.8k words ladder - flash memory, 14.6k words V-memory), RLL/RLLPLUS programming, real time clock/calendar, two built-in RS-232C ports. Bottom port also supports Remote I/O Master, DirectNET Master/Slave RS-422, Modbus RTU Master/Slave RS-485/RS-422, and ASCII In/Out. Advanced instruction set includes up to 16 PID loops, ASCII In/Out instructions, and Modbus RTU instructions. Also supports DL205 local base expansion (using -1 bases), up to four additional bases. Requires DirectSOFT Release 4.0 or later for programming. Battery not included. User manual D2-USER-M available as a free download, or purchase hard copy separay. 
D2-250-1    DirectLOGIC 205 series PLC CPU module, (direct replacement for D2-250) 14.8k words total (7680 words ladder - flash memory, 7168 words V-memory), RLL/RLLPLUS programming, two built-in RS-232C ports. Bottom port also supports Remote I/O Master, RS-422, DirectNET Master/Slave, Modbus RTU Master/Slave. Advanced instruction set includes up to 4 PID loops. Also supports DL205 local base expansion (using -1 bases), up to two additional bases. Requires DirectSOFT Release 2.1 or later for programming, and 4.0 or later for local expansion support. Battery not included. User manual D2-USER-M available as a free download, or purchase hard copy separay. 
DL2batnotes    DL205 batteries
D2-BAT    DL230/DL240 CPU battery (Optional)
D2-BAT-1    CLICK analog CPUs, DL06, D2-250(-1), D2-260, D3-350, and Productivity3000 CPU battery (optional); and replacement battery for the C-more touch panels
D2-USER-M    All DL205 CPUs, bases, discrete I/O and local expansion are covered in the DL205 User Manual. Order manual separay.
DL2memnotes    DL205 Spare EEPROM Memory
D2-EE-1    8k EEPROM (for use with the DL230 CPU or the D2-HPP), qty. 2 
D2-EE-2    32k EEPROM (for use with the DL240 system), qty. 2 
DL2basenotes    DL205 I/O Bases
D2-03B-1    3-slot base, requires external 110-220 VAC power, 24VDC 300mA isolated auxiliary output power, local I/O expandable. Replaces D2-03B.
D2-03BDC1-1    3-slot base, requires external 12-24 VDC power (no isolated auxiliary output power), local I/O expandable. Replaces D2-03BDC-1
D2-04B-1    4-slot base, requires external 110-220 VAC power, 24VDC 300mA isolated auxiliary output power, local I/O expandable. Replaces D2-04B
D2-04BDC1-1    4-slot base, requires external 12-24 VDC power (no isolated auxiliary output power), local I/O expandable. Replaces D2-04BDC-1
D2-06B-1    6-slot base, requires external 110-220 VAC power, 24VDC 300mA isolated auxiliary output power, local I/O expandable. Replaces D2-06B
D2-06BDC1-1    6-slot base, requires external 12-24 VDC power (no isolated auxiliary output power), local I/O expandable. Replaces D2-06BDC-1
D2-06BDC2-1    6-slot base, requires external 125VDC power (no isolated auxiliary output power), local I/O expandable. Replaces D2-06BDC-2
D2-09B-1    9-slot base, requires external 110-220 VAC power, 24VDC 300mA isolated auxiliary output power, local I/O expandable. Replaces D2-09B
D2-09BDC1-1    9-slot base, requires external 12-24 VDC power (no isolated auxiliary output power), local I/O expandable. Replaces D2-09BDC-1
D2-09BDC2-1    9-slot base, requires external 125VDC power (no isolated auxiliary output power), local I/O expandable. Replaces D2-09BDC-2
DL2DCInotes    DL205 DC Input Modules
D2-08ND3    8-point 12-24 VDC current sinking/sourcing input module, 1 common (2 common terminals), removable terminal
D2-16ND3-2    16-point 24VDC current sinking/sourcing input module, 2 commons (isolated), European type removable terminal
D2-32ND3    32-point 24VDC current sinking/sourcing input module, 4 commons (isolated). Requires one connector, sold separay. NOTE: Recommended pre-wired ZIPLink connector cable for this I/O Module is part number ZL-D24-CBL40#; where # designates either 0.5, 1, or 2 meter cable lengths. Accessory cable connector module for ZL-D24-CBL40# cable is part number ZL-RTB40 or ZL-LTB32-24. (Or build a custom cable with ZL-D24-CON-R, ZL-D24-CON-X, ZL-D24-CON or ZL-D24-CBL40#P.)
D2-32ND3-2    32-point 5-15 VDC current sinking/sourcing input module, 4 commons (isolated). Requires one connector, sold separay. NOTE: Recommended pre-wired ZIPLink connector cable for this I/O Module is part number ZL-D24-CBL40#; where # designates either 0.5, 1, or 2 meter cable lengths. Accessory cable connector module for ZL-D24-CBL40# cable is part number ZL-RTB40 or ZL-LTB32-24. (Or build a custom cable with ZL-D24-CON-R, ZL-D24-CON-X, ZL-D24-CON or ZL-D24-CBL40#P.)
DL2ACInotes    DL205 AC Input Modules
D2-08NA-1    8-point 110VAC input module, 1 common (2 common terminals), removable terminal
D2-08NA-2    8-point 220VAC input module, 1 common (2 common terminals), removable terminal
D2-16NA    16-point 110VAC input module, 2 commons (isolated), European type removable terminal
DL2DCOnotes    DL205 DC Output Modules
D2-04TD1    4-point 12-24 VDC current sinking output module, 1 common (4 common terminals),4.0A/point, 8.0A/module, fused per point (non-replaceable), removable terminal
D2-08TD1    8-point 12-24 VDC current sinking output module, 1 common (2 common terminals), 0.3A/point, 2.4A/module, fused (non-replaceable), removable terminal
D2-08TD2    8-point 12-24 VDC current sourcing output module, 1 common, 0.3A/point, 2.4A/module, fused per common (non-replaceable), removable terminal
D2-16TD1-2    16-point 12-24 VDC current sinking output module, 1 common (2 common terminals), 0.1A/point, 1.6A/module, no fuse, European type removable terminal
D2-16TD2-2    16-point 12-24 VDC current sourcing output module, 2 commons (isolated), 0.1A/point, 1.6A/module, no fuse, European type removable terminal
F2-16TD1P    16-point, 12-24 VDC current sinking output module, 2 common terminals, 0.25A/point continuous, overcurrent trip 0.6A min, 1.2A max, independent overtemperature protection for each output, removable terminal block. Not compatible with D2-230, D2-240, and D2-250 CPUs.
F2-16TD2P    16-point, 12-24 VDC current sourcing output module, 1 common terminal, 0.25A/point continuous, overcurrent trip 0.6A min, 1.2A max, independent overtemperature protection for each output, removable terminal block. Not compatible with D2-230, D2-240, and D2-250 CPUs.
D2-32TD1    32-point 12-24 VDC current sinking output module, 4 commons (isolated), 0.1A/point, 3.2A/module, no fuse. Requires one connector, sold separay. NOTE: Recommended pre-wired ZIPLink connector cable for this I/O Module is part number ZL-D24-CBL40#; where # designates either 0.5, 1, or 2 meter cable lengths. Accessory cable connector module for ZL-D24-CBL40#; cable is part number ZL-RTB40, or ZL-RFU40. (Or build a custom cable with ZL-D24-CON-R, ZL-D24-CON-X, ZL-D24-CON or ZL-D24-CBL40#P.)
D2-32TD2    32-point 12-24 VDC current sourcing output module, 4 commons (isolated), 0.1A/point, 3.2A/module, no fuse. Requires one connector, sold separay. NOTE: Recommended pre-wired ZIPLink connector cable for this I/O Module is part number ZL-D24-CBL40#; where # designates either 0.5, 1, or 2 meter cable lengths. Accessory cable connector module for ZL-D24-CBL40#; cable is part number ZL-RTB40, or ZL-RFU40. (Or build a custom cable with ZL-D24-CON-R, ZL-D24-CON-X, ZL-D24-CON or ZL-D24-CBL40#P.)
DL2ACOnotes    DL205 AC Output Modules
D2-08TA    8-point 18-220 VAC output module, 1 common (2 common terminals), 0.5A/point, 4.0A/module, removable terminal
F2-08TA    8-point 24-140 VAC high current output module, 2 commons (isolated), 1.5A/point, 4.0A/common, removable terminal
D2-12TA    12-point 18-110 VAC output module 2 commons (isolated), 0.3A/point, 1.8A/common, replaceable fuse, European type removable terminal
DL2RLYnotes    DL205 Relay Output Modules
D2-04TRS    4-point 5-30 VDC or 5-240 VAC isolated relay output module, 4 Form A (SPST) relays, 4 commons, 4A/point, 8.0A/module, replaceable fuse, removable terminal
D2-08TR    8-point 5-30 VDC or 5-240 VAC relay output module, 8 Form A (SPST) relays, 1 common (2 common terminals), 1A/point, 4.0A/module, replaceable fuse, removable terminal
F2-08TR    8-point 12-28 VDC or 12-250 VAC relay output module, 8 Form A (SPST) relays, 2 isolated commons, 10A/common max., no fuses, removable terminal
F2-08TRS    8-point 12-28 VDC or 12-240 VAC relay  output module, 5 Form A (SPST) relays, 3 Form C (SPDT) relays. 8 isolated commons, 7A/point max., no fuses, removable terminal
D2-12TR    12-point 5-30 VDC or 5-240 VAC relay output module, 12 Form A (SPST) relays, 2 commons, 1.5A/point max., 3.0A/common, 2 replaceable fuses, removable terminal
DL2combonotes    DL205 Combination Discrete Modules
D2-08CDR    4-point 24VDC sinking/sourcing input, 1 common, 4-point relay output, 1A/pt., 4A/module, 1 common, replaceable fuse
DL2analognotes    DL205 Analog Modules
F2-04AD-1    4-channel analog input module, 12-bit resolution, range: 4-20 mA
F2-04AD-2    4-channel analog input module, 12-bit resolution, range: 0-5V, 0-10V, -5 to +5V, -10 to +10V
F2-08AD-1    8-channel analog input module, 12-bit resolution, range: 4-20 mA
F2-08AD-2    8-channel analog input module, 12-bit resolution, ranges: 0-5 VDC, 0-10 VDC,  -5 to +5V, -10 to +10 VDC
F2-02DA-1    2-channel analog output module, 12-bit resolution, range 4-20 mA
F2-02DA-2    2-channel analog output module, 12-bit resolution, ranges: 0-5V, 0-10V, -5 to +5V, -10 to +10V
F2-02DA-1L    2-channel analog output module, 12-bit resolution, range 4-20 mA
F2-02DA-2L    2-channel analog output module, 12-bit resolution, ranges: 0-5V, 0-10V, -5 to +5V, -10 to +10V
F2-02DAS-1    2-channel analog output, 16-bit resolution, isolated, range: 4-20 mA current sourcing
F2-02DAS-2    2-channel analog output, 16-bit resolution, isolated, range: 0-5V, 0-10V
F2-08DA-1    8-channel analog output module, 12-bit resolution, range: 4-20 mA, sink or source output configurable. Designed to operate with 24VDC user-supplied power supply. 
F2-08DA-2    8-channel analog output module, 12-bit resolution, ranges: 0-5V, 0-10V
F2-4AD2DA    4-channel analog input and 2-channel analog output module (sink), 12-bit resolution, range 4-20 mA
F2-8AD4DA-1    8-channel analog input / 4-channel analog output module. Inputs: selectable 16-bit, 14-bit, or 12-bit resolution, range 0-20 mA. Outputs: 16-bit resolution, range 4-20 mA, current sourcing. Not supported in D2-230 or D2-240 CPUs.
F2-8AD4DA-2    8-channel analog input / 4-channel analog output module. Inputs: selectable 16-bit, 14-bit, or 12-bit resolution, range 0-5 VDC or 0-10 VDC. Outputs: 0-5 VDC at 15 bit resolution, 0-10 VDC at 16 bit resolution. Not supported in D2-230 or D2-240 CPUs.
DL2tempnotes    DL205 temperature input modules
F2-04RTD    4-channel RTD input module, 0.15 degrees C resolution, supports: Pt100, jPt100, Pt1000, Cu10, Cu25
F2-04THM    4-channel thermocouple input module, 0.1 degrees C resolution, supports: J, E, K, R, S, T, B, N, C; 0-5 VDC, -5 to +5 VDC, 0-156 mVDC, -156 to +156 mVDC at 16-bit resolution
D2-ANLG-M    DL205 Analog modules, including the F2-04RTD and F2-04THM, are covered in the DL205 Analog I/O Manual. Order manual separay.
DL2locnotes    DL205 Local Expansion I/O
D2-EM    Local I/O expansion module for use with D2-250-1 and D2-260 CPU based PLCs. Installs on the side of each I/O base (CPU base AND expansion bases) in a local expansion system. Includes 2 RJ-45 cable ports for expansion cables to plug into, single ACTIVE LED for system status indication, TERM toggle switch for last and first base termination. Expansion cables sold separay.(Not compatible with D2-230, D2-240, Do-more H2 series CPUs or WinPLC.)
D2-CM    Local I/O expansion controller module for D2-250-1 and D2-260 CPU based PLCs. Installs in the CPU slot of each expansion base, expansion base number rotary switch selectable, PWR, RUN, and DIAG LEDs for system status indication.  (Not compatible with D2-230, D2-240, Do-more H2 series CPUs or WinPLC.)
D2-EXCBL-1    DL205 base expansion cable, 3.08 ft. (1m), used with D2-EM expansion modules.
DL2ethremnotes    DL205 Remote I/O
H2-ERM100    Ethernet Remote Master module, for Ethernet remote I/O on a 10/100Base-T network at 10/100 Mbps. Must be installed in a local base with a D2-240, D2-250(-1), D2-260, Do-more H2 series or H2-WPLCx-xx CPU module in the CPU slot. Ethernet cable (purchased separay) connects to H2/H4/T1H-EBC(100), GS-EDRV100 modules directly or via Ethernet hub(s). (Not compatible with D2-230 CPU.)
H2-ERM-F    Not recommended for new development. Consider using an H2-ERM100 with Stride media converters or switches with ST or SC fiber. Ethernet Remote Master module, for Ethernet remote I/O on a 10Base-FL network at 10 Mbps. Must be installed in a local base, with a D2-240, D2-250(-1), D2-260, Do-more H2 series or H2-WPLCx-xx CPU module in the CPU slot. Ethernet cable connects to H2/H4-EBC-F modules directly or via 10Base-FL Ethernet hub(s) (cables not included, cables/hubs not available from AutomationDirect). (Not compatible with D2-230 CPU.)?
H24-ERM-M    Ethernet I/O Controller manual covers all H2-ERM(100)(F) and H4-ERM(100)(F) modules. Order manual separay.
H2-EBC-F    Not recommended for new development. Consider using an H2-EBC100 with Stride media converters or switches with ST or SC fiber. Ethernet Base Controller for DL205 Base, supports discrete and analog I/O only. Supports 10Base-FL connections at 10 Mbps to Hx-ERM-F or PC-based controllers supporting IP/IPX protocol. Installs in CPU slot only. Cables not included, cables/hubs not available from AutomationDirect.
H2-EBC100    Ethernet Base Controller for DL205 base, for connection to Do-more Ethernet I/O, PLC Ethernet master (Hx-ERM100) or PC Ethernet network interface card. Supports 10/100 Mbps auto-detect, TCP/IP, UDP/IP, IPX, and Modbus TCP/IP application layer protocol.
H24-EBC-M    Manual covers all H2-EBC and H4-EBC modules. Order manual separay.
H2-ERKIT-x    Ethernet Remote I/O Kit, includes (1) H2-ERM plus x number of H2-EBC100s by adding -1, -2, etc as the part number suffix, up to -10.  Ethernet Remote I/O for a 10/100Base-T Ethernet network at 10/100 Megabaud, cable not included. H2-ERM must be installed in a local base, with a D2-240, D2-250(-1), D2-260 or H2-WPLCx-xx in the CPU slot. Ethernet cable connects to H2-EBC100s directly or via Ethernet hub(s). 
H2-ERKIT-1    Ethernet Remote I/O Kit, includes (1) H2-ERM plus (1) H2-EBC100.  Ethernet remote I/O for a 10/100Base-T Ethernet network at 10/100 Megabaud, cable not included. H2-ERM must be installed in a local base, with a D2-240, D2-250(-1), D2-260 or H2-WPLCx-xx in the CPU slot. Ethernet cable connects to H2-EBC100s directly or via Ethernet hub(s). 
H2-ERKIT-2    Ethernet Remote I/O Kit, includes (1) H2-ERM plus (2) H2-EBC100s.  Ethernet Remote I/O for a 10/100Base-T Ethernet network at 10/100 Megabaud, cable not included. H2-ERM must be installed in a local base, with a D2-240, D2-250(-1), D2-260 or H2-WPLCx-xx in the CPU slot. Ethernet cable connects to H2-EBC100s directly or via Ethernet hub(s). 
H2-ERKIT-3    Ethernet Remote I/O Kit, includes (1) H2-ERM plus (3) H2-EBC100s.  Ethernet Remote I/O for a 10/100Base-T Ethernet network at 10/100 Megabaud, cable not included. H2-ERM must be installed in a local base, with a D2-240, D2-250(-1), D2-260 or H2-WPLCx-xx in the CPU slot. Ethernet cable connects to H2-EBC100s directly or via Ethernet hub(s). 
T12-ERKIT-x    Ethernet Remote I/O Kit, includes (1) H2-ERM plus x number of Terminator T1H-EBC100s by adding -1, -2, etc as the part number suffix, up to -10. Ethernet Remote I/O for a 10/100Base-T Ethernet network at 10/100 Megabaud, cable not included. H2-ERM must be installed in a local base, with a D2-240, D2-250(-1), D2-260 or H2-WPLCx-xx in the CPU slot. Ethernet cable connects to T1H-EBC100s directly or via Ethernet hub(s). 
T12-ERKIT-1    Ethernet Remote I/O Kit, includes (1) H2-ERM plus (1) Terminator T1H-EBC100. Ethernet Remote I/O for a 10/100Base-T Ethernet network at 10/100 Megabaud, cable not included. H2-ERM must be installed in a local base, with a D2-240, D2-250(-1), D2-260 or H2-WPLCx-xx in the CPU slot. Ethernet cable connects to T1H-EBC100s directly or via Ethernet hub(s). 
T12-ERKIT-2    Ethernet Remote I/O Kit, includes (1) H2-ERM plus (2) TerminatorT1H-EBC100s. Ethernet Remote I/O for a 10/100Base-T Ethernet network at 10/100 Megabaud, cable not included. H2-ERM must be installed in a local base, with a D2-240, D2-250(-1), D2-260 or H2-WPLCx-xx in the CPU slot. Ethernet cable connects to T1H-EBC100s directly or via Ethernet hub(s). 
T12-ERKIT-3    Ethernet Remote I/O Kit, includes (1) H2-ERM plus (3) TerminatorT1H-EBC100s. Ethernet Remote I/O for a 10/100Base-T Ethernet network at 10/100 Megabaud, cable not included. H2-ERM must be installed in a local base, with a D2-240, D2-250(-1), D2-260 or H2-WPLCx-xx in the CPU slot. Ethernet cable connects to T1H-EBC100s directly or via Ethernet hub(s). 
DL2serromnotes    DL205 serial remote I/O modules
D2-RSSS    Serial remote I/O slave module. Supports both RM-NET and SM-NET protocols. Slaves are installed in the CPU slot of a standard DL205 base. Unit has non-removable terminals, uses twisted pairs with overall foil shield communication cable (24 AWG minimum). Unit also has a built-in RS-232C communications port that can be used for programming. (SM-NET only)
D2-REMIO-M    DL205 Serial Remote I/O systems (using D2-RMSM and D2-RSSS) covered in the DL205 Remote I/O Manual. Order manual separay.
DL2commnotes    DL205 Communications and Networking
H2-ECOM-F    Not recommended for new development. Consider using an H2-ECOM100 with Stride media converters or switches with ST or SC fiber. Ethernet Communication Module for D2-240, D2-250(-1), D2-260, and Do-more H2 series CPU based PLCs. Supports master/slave communication on an Ethernet 10Base-FL network at 10 Mbps, IP/IPX protocols. Cables not included, cables/hubs not available from AutomationDirect. (Not compatible with D2-230 CPU or WinPLC.)
H2-ECOM100    Ethernet Communication Module for D2-240, D2-250(-1), D2-260, and Do-more H2 series CPU based PLCs. Supports master/slave communication, 10/100 Mbps auto-detect, TCP/IP, UDP/IP, IPX, and Modbus TCP application layer protocols. (Not compatible with D2-230 CPU or WinPLC.)
HX-ECOM-M    Ethernet Communications Manual covers all H0-ECOM, H2-ECOM and H4-ECOM modules. Replaces H24-ECOM-M. Order manual separay.
DL2sercomnotes    DL205 serial communications
D2-DCM    Data Communication Module for DL205 series PLCs, master/slave on a DirectNET Network, slave on a Modbus RTU Network, RS-232C/RS-422 communications, cable not included. (Not compatible with Do-more H2 series PLCs or WinPLC.)
D2-DCM-M    Data Communications Manual covers D2-DCM and D3-DCM modules. Order manual separay.
H2-SERIO    3-port RS-232 serial I/O module for Do-more H2 series PLCs, WinPLC, or an H2-EBC100 based system connected to a PC. Includes (3) RS-232 ports; allows connection of a wide range of serial devices, such as barcode scanners, scales, printers, modems, etc. See appropriate H2-DM-M or H2-WPLC-M manual for module usage (free download or purchase separay). (Not compatible with DL205 series PLCs.)
H2-SERIO-4    3-port RS-232/RS-422/RS-485 serial I/O module, for Do-more H2 series PLCs, WinPLC, or an H2-EBC100 based system connected to a PC. Includes (2) RS-232 ports, (1) RS-422 or RS-485 port (2-wire or 4-wire); allows connection of a wide range of serial devices, such as barcode scanners, scales, printers, modems, etc. See appropriate H2-DM-M or H2-WPLC-M manual for module usage (free download or purchase separay). (Not compatible with DL205 series PLCs.)
DL2pronotes    DL205 Profibus slave module
H2-PBC    Profibus DL205 I/O base controller. Supports Profibus DP 10 Mbps connection to Profibus Master controllers. This module supports discrete and analog I/O only. Requires ERNI communications connectors listed in DL205 Spare Parts and Accessories section.
H2-PBC-M    Manual for H2-PBC. Order manual separay.
DL2devnotes    DL205 DeviceNet slave module
F2-DEVNETS-1    DeviceNet DL205 I/O base controller. Slave controller for DeviceNet connection to your DeviceNet master. Replaces F2-DEVNETS. (See technical section for system replacement details.) This module supports discrete and analog I/O only.
F2-DEVNETS1-M    Manual for F2-DEVNETS-1. Replaces F2-DEV-M. Order manual separay.
DL2sdsnotes    DL205 SDS slave module
F2-SDS-1    Smart Distributed System (SDS) DL205 I/O base controller. Slave controller for SDS connection to your SDS master. This module supports Discrete and Analog I/O only.
F2-SDS-M    Manual for F2-SDS. Order manual separay.
DL2copnotes    DL205 CoProcessor module
F2-CP128    3-port Overdrive CoProcessor module for D2-240, D2-250(-1) or D2-260 CPU based PLCs. 128k battery backed RAM, 26Mhz clock. Port 1: RS-232C/RS-422/RS-485 (115.2 kbaud max.); Port 2: RS-232C/RS-422/RS-485 (57.6 kbaud max.); Port 3: RS-232C, maximum baud 19.2k. Includes a DB9 connector, port 1/3 splitter, and a 7-foot 6P6C cable. Also includes CD containing ABM Commander for Windows/DOS and example programs.  (Not compatible with D2-230 or Do-more H2 series CPUs.)
F2-CP-M    Manual for F2-CP128. Order manual separay.
DL2HSCnotes    DL205 High Speed Counter modules
H2-CTRIO2    High-speed counter interface module for D2-240, D2-250(-1), D2-260 CPU based PLCs, Do-more H2 and T1H series PLCs, and WinPLC. (8) 9-30 VDC sink/source inputs, (4) 5-36 VDC isolated sink/source outputs, 1A per point. Inputs supported: 2 quadrature encoder counters up to 250kHz, or 4 single-channel counters up to 250kHz, and 4 high-speed discrete inputs for Reset, Inhibit, or Capture. Outputs supported: 4 independently configurable high-speed discrete outputs or 2 channels pulse output control, 20Hz-250kHz per channel, pulse and direction or CW/CCW pulses. (Not compatible with D2-230 CPU.) Must use with Do-more Designer or CTRIO Workbench v2.2.0 or higher.
HX-CTRIO-M    High Speed Counter I/O Manual for all H0-CTRIO(2), H2-CTRIO(2), H4-CTRIO and T1H-CTRIO modules. Replaces H24-CTRIO-M.  Order manual separay.
D2-CTRINT    Counter interface module for DL205 series PLCs, 4 isolated DC inputs, 1 pulse train output (cw) or 2 pulse train outputs (cw,ccw) with DC input restrictions, accepts two up-counters when used with D2-240, D2-250(-1) or D2-260 (one only with D2-230) CPUs, or one up/down counter.  (Not compatible with Do-more H2 series PLCs or WinPLC.)
D2-CTRIF-M    DL205 Counter Interface Manual for D2-CTRINT. Order manual separay.
DL2simnotes    DL205 Simulator module
F2-08SIM    8-point Input Simulator
D2-INST-M    DL205 Installation and I/O Manual. Covers installation and wiring, plus specifications of all discrete I/O modules.
DL2prognotes    DL205 Programming
D2-HPP    DL205 Handheld Programmer provides programming, testing and monitoring for all DL05, DL06, DL105, DL205 and D3-350 CPUs. Supports both RLL and RLLPLUS instructions. Includes cable (DV-1000CBL).
D2-HPP-U    Upgrade kit to allow existing D2-HPP Handheld Programmers with firmware V1.82 or earlier to program the DL05, DL06 and DL105 units.
D2-HP-M    DL205 Handheld Programmer Manual. Order manual separay.
DL2sparenotes    DL205 Spare Parts and  Accessories
D2-ACC-1    Spare screws for DL205 base power supply terminals (qty. 8) and one plastic terminal strip cover
D2-ACC-2    Spare screws for DL205 4-point and 8-point I/O module terminal blocks, package of 16
D2-ACC-3    Spare screws for DL205 12-point and 16-point I/O module terminal blocks, package of 16
D2-FUSE-1    3.15A slow blow spare fuses for D2-12TA, package of 5
D2-FUSE-3    6.3A slow blow spare fuses for D2-04TRS, D2-08TR, D2-08CDR, package of 5
D2-FUSE-4    4A fuses for D2-12TR, package of 5
D2-8IOCON    8-point module connectors, package of 5
D2-16IOCON    16-point module connectors, package of 5
D2-IOCVR    I/O module covers, package of 5
D2-BASECVR    DL205 base covers for expansion connector on right side of the -1 bases, package of 3
D2-FILL    Filler Module with cover
D2-DSCBL-2    12 ft. (3.66m) shielded pigtail cable for port 2 of a DL06, D2-250(-1) or D2-260 CPU. 15-pin D-shell male SVGA connector to 14 tinned wires.
DL305notes    DL305 CPUs
D3-350    D3-350 CPU, 14.8K words total (7680 words ladder - EEPROM, 7168 words V-memory), RLL/RLLPLUS programming, two built-in RS-232C ports. Bottom port also supports RS-422, DirectNET Master/Slave, Modbus RTU Master/Slave. Advanced instruction set includes up to 4 PID loops. Requires DirectSOFT Release 2.2 or later to program. Battery not included.
D3-340    Enhanced DL340 CPU, 3.7K words RAM, RLL programming, built-in RS-232C networking port
D3-330    D3-330 CPU, 3.7K words RAM, RLL programming  (D3-232-DCU or D3-422-DCU required if using Windows-based programming.)
DL3batnotes    DL305 batteries
DL4batnotes    DL405 batteries
D3-D4-BAT    DL330/340/DL405 CPU replacement battery, 3V lithium Sanyo #CR17335SE
DL3memnotes    DL305 Memory chips
D3-CPU-UV    Optional DL330/DL330P/DL340 UVPROM chips (4 in set) only 1 chip per CPU is needed for program memory storage, requires a D3-PWU (PROM Writer Unit) to store the program to the UVPROM. 
D3-340-EE    Optional D3-340 CPU EEPROM chips (4 in set) only 1 chip per CPU is needed for program storage.
D3-RAM-1    D3-330 RAM chip, pack of 2
D3-USER-M    All DL305 CPUs except the D3-350 are covered in the DL305 User Manual. Order separay.
D3-350-M    D3-350 User Manual for the D3-350 CPU only. Order separay.
DL3cpunotes    DL305 Specialty CPUs
F3-OMUX-1    FACTS Bridge CPU, two non-isolated RS-232C/RS-422/RS-485 ports, interfaces DL305 I/O modules to a host computer with an OPTOMUX compatible driver, custom cable required.
F3-OMUX-2    FACTS Bridge CPU, two isolated RS-422/RS-485 ports, interfaces DL305 I/O modules to a host computer with an OPTOMUX compatible driver, custom cable required.
F3-OMUX-M    OMUX CPU User Manual covers all OMUX CPUs. Order separay.
F3-PMUX-1    FACTS Bridge CPU, Interfaces DL305 I/O modules to a host computer with a Pamux compatible driver, via a 50-pin high-speed parallel bus, custom cable required. Note: replaces F3-PMUX. F3-PMUX-1 has 26Mhz processor.
F3-PMUX-M    PMUX CPU User Manual. Hard copy no longer available; download online at no charge.
DL3basenotes    DL305 Bases and Cables
D3-05B-1    5-slot local or expansion base, requires external 110-220 VAC power, includes 100mA 24VDC auxiliary device power supply. CPU must reside in the first slot of the local CPU base, allows use of inligent modules with D3-350 CPU. Check I/O configuration chart before ordering.
D3-05BDC    5-slot local or expansion base, requires external 24VDC power, no auxiliary device power supply. CPU must reside in the first slot of the local CPU base, allows use of inligent modules with D3-350 CPU. Check I/O configuration chart before ordering.
D3-08B-1    8-slot local or expansion base, requires external 110-220 VAC power, includes 100mA 24VDC auxiliary device power supply. CPU must reside in the first slot of the local CPU base, allows use of inligent modules with D3-350 CPU. Check I/O configuration chart before ordering.
D3-10B-1    10-slot local or expansion base, requires external 110-220 VAC power, includes 100mA 24VDC auxiliary device power supply. CPU must reside in the first slot of the local CPU base, allows use of inligent modules with D3-350 CPU. Check I/O configuration chart before ordering.
D3-10BDC    10-slot local or expansion base, requires external 24VDC power, no auxiliary device power supply. CPU must reside in the first slot of the local CPU base, allows use of inligent modules with D3-350 CPU. Check I/O configuration chart before ordering.
D3-EXCBL    Base expansion cable, 1.5 ft. (0.5m)
DL3DCInotes    DL305 DC Input Modules
D3-08ND2    8-point 24VDC current sourcing input module, 2 commons (internally connected), non-removable terminal
D3-16ND2-1    16-point 24VDC current sourcing input module, 2 commons (internally connected), removable terminal
F3-16ND3F    16-point 5VDC / 12-24 VDC fast response (1ms) current sinking/sourcing input module, 2 commons (internally connected), removable terminal
DL3ACInotes    DL305 AC Input Modules
D3-08NA-1    8-point 110VAC input module, 2 commons (isolated), non-removable terminal
D3-08NA-2    8-point 220VAC input module, 2 commons (isolated), non-removable terminal
D3-16NA    16-point 110VAC input module, 2 commons (isolated), removable terminal
DL3combonotes    DL305 AC/DC Input Modules
D3-08NE3    8-point 24 VAC/DC current sinking/sourcing input module, 2 commons (isolated), non-removable terminal
D3-16NE3    16-point 24 VAC/DC current sinking/sourcing input module, 2 commons (isolated), removable terminal
DL3DCOnotes    DL305 DC Output Modules
D3-08TD1    8-point 5-24 VDC current sinking output module, 0.5A/point, 2 commons (internally connected), non-removable terminal, 2 non-replaceable fuses
D3-08TD2    8-point 5-24 VDC current sourcing output module, 0.5A/point,2 commons (internally connected), non-removable terminal, 2 non-replaceable fuses
D3-16TD1-1    16-point 5-24 VDC current sinking output module, 0.5A/pt., 2 commons (internally connected), removable terminal, 2 non-replaceable fuses
D3-16TD2    16-point 5-24 VDC current sourcing output module, 0.5A/point, 2 commons (isolated), removable terminal, 2 non-replaceable fuses
DL3ACOnotes    DL305 AC Output Modules
D3-04TAS    4-point isolated 110-220 VAC output module, 2A/point, 4 commons (isolated), non-removable terminal, 4 user-replaceable fuses
F3-08TAS-1    8-point isolated 20-125 VAC output module, 1.5 A/point, 8 commons (isolated), removable terminal, 8 user-replaceable fuses. Replaces the F3-08TAS in applications switching 20-125 VAC loads.
D3-08TA-1    8-point 110-220 VAC output module, 1A/point, 2 commons (isolated), removable terminal, 2 non-replaceable fuses
D3-08TA-2    8-point 110-220 VAC output module , 1A/point, 2 commons (isolated), non-removable terminal 2 non-replaceable fuses
F3-16TA-2    16-point 20-125 VAC output module, 1.1A/point, 2 commons (isolated), removable terminal, 4 user-replaceable fuses
D3-16TA-2    16-point 15-220 VAC output module, 0.5A/point, 2 commons (isolated), removable terminal 2 non-replaceable fuses
DL3RLYnotes    DL305 Relay Output Modules
D3-08TR    8-point 5-30 VDC or 5-220 VAC output module, 5A/point DC or 4A/point AC, 8 Form A relays (SPST), 2 commons (isolated), non-removable terminal, 2 user replaceable fuses
F3-08TRS-1    8-point 12-30 VDC or 12-220 VAC output module, 10A/point, 2 Form C (SPDT) relays and 6 Form A (SPST) relays, 8 commons, (isolated), removable terminal, 8 non-replaceable fuses
F3-08TRS-2    8-point 12-30 VDC or 12-220 VAC output module, 5A/point, 2 Form C (SPDT) relays and 6 Form A (SPST) relays, 8 commons (isolated), removable terminal, 8 user replaceable fuses
D3-16TR    16-point 5-30 VDC or 5-220 VAC output module, 2A/point,16 Form A relays (SPST), 2 commons (isolated), removable terminal, no internal fuses
DL3analognotes    DL305 Analog Modules
F3-04ADS    4-channel isolated analog input module, 12-bit resolution; ranges: 0-5V, 0-10V, -5 to +5V, -10 to +10V, 1-5V, 0-20 mA, 4-20 mA; -750 to +750 VDC channel-to-channel isolation
F3-08AD-1    Exact replacement for F3-08AD, 8-channel analog input module 12-bit resolution, range: 4-20 mA
F3-16AD    16-channel analog input module, 12-bit resolution, ranges: -5 to +5V, -10 to +10V, 0-10V, 0-20 mA. Each point can be either a voltage or current input.
F3-04DA-1    4-channel analog output module,12-bit resolution, ranges: 0-5V, 0-10V, 4-12 mA, 4-20 mA (sourcing)
F3-04DAS    4-channel isolated analog output module, 12-bit resolution; ranges: 0-5V, 0-10V, -5 to +5V, -10 to +10V, 4-20 mA, 0-20 mA; -750 to +750 VDC channel to channel isolation
DL3tempnotes    DL305 temperature input modules
F3-08THM-J    J type 8-channel differential thermocouple module, built-in cold junction compensation, linearization, and burn-out indication. Direct indication in degrees C or degrees F over the full range. 
F3-08THM-K    K type 8-channel differential thermocouple module, built-in cold junction compensation, linearization, and burn-out indication. Direct indication in degrees C or degrees F over the full range.
D3-ANLG-M    All analog I/O modules are covered in the DL305 Analog I/O Manual, including the Temperature Input and Thermocouple Input modules. Order manual separay.
DL3commnotes    DL305 Communications and Networking
D3-DCM    Data Communication Module, Master/slave on a DirectNET Network, slave on a Modbus RTU Network, RS-232C/RS-422 communications, cable not included. Works with D3-350 CPU only. Order D2-DCM-M manual separay. 
D3-232-DCU    RS232C Data Communication Unit, attaches to front of DL305 CPU to provide an RS232C programming port connection for use with a personal computer (25-pin female). (Except D3-350 CPU)
D3-422-DCU    RS422 Data Communication Unit, attaches to front of DL305 CPU to provide an RS422 port (25-pin female). (Except D3-350 CPU) 
D3-DCU-M    DL305 Data Communication Manual, covers DL305 Communications Units. Order separay.
FA-UNICON    In-line, DB25, RS-232C to RS-422/RS-485 converter. Connectors provided for the D3-422-DCU and to connect a DirectLOGIC RJ11/RJ12 RS-232C port to a female RS-422/RS-485 port connector. Power directly from the PLC base 24VDC supply or an external power supply. Includes manual with product. The FA-UNICON provides no signal isolation so it is not recommended for noisy industrial environments. Connection to a PC RS-232 COM port requires a custom cable.
DL3BASICnotes    DL305 ASCII BASIC Modules
F3-AB128    Not recommended for new development. ASCII BASIC module, 128k program memory. Port 1: RS-232C/RS-422/RS-485, 115.2 kbaud; Ports 2 and 3: RS-232C, 9600 baud (includes Commander programming software for Windows on CD-ROM). Operates with D3-330, D3-330P, and D3-340 CPUs only.
F3-AB128-T    Not recommended for new development. ASCII BASIC module, 128k program memory. Port 1: RS-232C/RS-422/RS-485, 115.2 kbaud; Port 2: 300/1200/2400 baud ephone modem; Port 3: RS-232C, 9600 baud (includes Commander programming software for Windows on CD-ROM). Operates with D3-330, D3-330P, and D3-340 CPUs only. 
F3-AB128-R    Not recommended for new development. ASCII BASIC module, 128k program memory. Port 1: RS-232C/RS-422/RS-485, 115.2 kbaud; Port 2: 300/1200/2400 baud ephone modem; Port 3: RS-232C, 9600 baud (includes Commander programming software for Windows on CD-ROM). Operates with D3-330, D3-330P, and D3-340 CPUs only.
F3-AB-M    DL305 ASCII/BASIC Manual, covers DL305 ASCII/BASIC modules. Hard copy no longer available; download online at no charge
DL3specnotes    DL305 Specialty Modules
D3-08SIM    8-point input simulator module for program development/debug.
DL3prognotes    DL305 Programming
D3-HP    RLL handheld programmer with key lock, only programs D3-330 and D3-340 CPUs, connects to CPU, cable optional
D3-HPCBL    Handheld programmer shielded extension cable, 4.62 ft. (1.5m) for D3-HP
D3-HPCAS    Handheld programmer cassette interface replacement cable to connect a D3-HP to a recorder for program storage (qty. 2)
D3-HPKEY    Spare keys for D3-HP and D3-HPP, date codes 0338 or newer, package of 2 (Keys for units with date codes before 0338 no longer available)
D3-MBZL    Handheld programmer mounting bracket (for remote mounting of the handheld programmer)
D3-HP-M    Handheld Programmer and related products are covered in the DL305 Handheld Programmer Manual. Order separay.
DL3sparenotes    DL305 Spare Parts and  Accessories
D3-ACC-1    Spare screws for DL305 base power supply terminals (qty. 8) and one plastic terminal strip cover
D3-ACC-2    Spare screws for DL305 8-point I/O module terminal blocks, package of 16
D3-ACC-3    Spare screws for DL305 16-point I/O module terminal blocks, package of 16
D3-FUSE-1    2A (250V) spare fuses for D3-05B, D3-08B, D3-10B, package of 5. Note: Does not work in -1 bases. 
D3-FUSE-2    3A spare fuses for D3-04TAS, package of 5
D3-FUSE-3    4A (250V) spare fuses for D3-05BDC or D3-10BDC, package of 5
D3-FUSE-4    5A (125V) fast blow spare fuses for F3-08TASand F3-16TA-1, package of 5
D3-FUSE-5    10A spare fuses for D3-08TR, package of 5
D3-FUSE-6    10A spare fuses for F3-08TRS-2, package of 5
F3-FILL-CB    Filler modules with bare circuit board (for more secure attachment). Replaces D3-FILL.
D3-16IOCON    16-point I/O module terminals for DL305 products only, package of 5
D3-8IOCVR    8-point I/O module terminal block covers, package of 5
D3-16IOCVR    16-point I/O module terminal block covers for DL305 products only, package of 5
D3-IODSHEL    24-pin D-shell connectors, package of 5
D3-MANUAL    All above modules are covered in the DL305 or D3-350 User Manual. Order D3-USER-M or D3-350-M, depending on the CPU in your system.
DL405notes    DL405 CPUs
D4-450    D4-450 CPU, requires external 110-220 VAC power. 30.8K words total memory (7.5K flash ladder memory on board or use optional memory cartridge for up to 15.5K ladder (RAM, UVPROM, or EEPROM cartridges available)), RLL/RLLPLUS programming, including support for up to 16 PID loops and floating point math. Built-in communication ports include an RS-232C programming port and auxiliary RS-232C/RS-422 ports. NOTE: If the D4-450 is replacing a CPU in an existing system, and the system has specialty modules with an F4 part number, (CoPros, SDN, etc.) please contact our Technical Services group before ordering. These modules may require an upgrade to operate with the D4-450. (Does not apply to analog modules.)
D4-450DC-1    D4-450 CPU, requires external 24VDC power. 30.8K words total memory (7.5K flash ladder memory on board or use optional memory cartridge for up to 15.5K ladder (RAM, UVPROM, or EEPROM cartridges available)), RLL/RLLPLUS programming, including support for up to 16 PID loops and floating point math. Built-in communication ports include an RS-232C programming port and auxiliary RS-232C/RS-422 ports. NOTE: If the D4-450 is replacing a CPU in an existing system, and the system has specialty modules with an F4 part number, (CoPros, SDN, etc.) please contact our Technical Services group before ordering. These modules may require an upgrade to operate with the D4-450. (Does not apply to analog modules.)
D4-450DC-2    D4-450 CPU, requires external 125VDC power. 30.8K words total memory (7.5K flash ladder memory on board or use optional memory cartridge for up to 15.5K ladder (RAM, UVPROM, or EEPROM cartridges available)), RLL/RLLPLUS programming, including support for up to 16 PID loops and floating point math. Built-in communication ports include an RS-232C programming port and auxiliary RS-232C/RS-422 ports. NOTE: If the D4-450 is replacing a CPU in an existing system, and the system has specialty modules with an F4 part number, (CoPros, SDN, etc.) please contact our Technical Services group before ordering. These modules may require an upgrade to operate with the D4-450. (Does not apply to analog modules.)
D4-440    D4-440 CPU, requires external 110-220 VAC power, includes 400mA 24VDC auxiliary device power supply. 22.5K words total memory  (15.5K ladder - RAM, UVPROM, or EEPROM memory cartridge required, 7.0K V-memory), RLL/RLLPLUS programming, built-in RS-232C programming port and auxiliary RS-232C/RS-422 port.
D4-440DC-1    D4-440DC-1 CPU, requires external 24VDC power. 22.5K words total memory (15.5K ladder - RAM, UVPROM, or EEPROM memory cartridge required, 7.0K V-memory), RLL/RLLPLUS programming, built-in RS-232C programming port and auxiliary RS-232C/RS-422 port.
D4-440DC-2    D4-440DC-1 CPU, requires external 125VDC power. 22.5K words total memory (15.5K ladder - RAM, UVPROM, or EEPROM memory cartidge required, 7.0K V-memory), RLL/RLLPLUS programming, built-in RS-232C programming port and auxiliary RS-232C/RS-422 port.
D4-430    D4-430 CPU, requires external 110-220 VAC power, includes 400mA 24VDC auxiliary device power supply. 6.5K words total memory (3.5K ladder - EEPROM, 3.0K V-memory), RLL/RLLPLUS programming, built-in RS-232C programming port and auxiliary RS-232C/422 port.  (Memory cartridge cannot be used to expand memory.)
D4-USER-M    DL405 CPUs, bases, memory and discrete I/O modules are covered in the DL405 User Manual. Order manual separay.
DL4memnotes    DL405 Memory Cartridges
D4-UV-2    UVPROM cartridge, maximum program storage 15.5K
D4-EE-2    EEPROM cartridge, maximum program storage 15.5K
DL4expnotes    DL405 Expansion Units and Cables
D4-EX    Local base expansion unit, requires external 110-220 VAC power, includes 24VDC 400mA auxiliary device power supply. Requires external local I/O expansion cable D4-EXCBL-1 or D4-EXCBL-2, purchased separay.
D4-EXDC    Local base expansion unit, requires external 24VDC power, no auxiliary device power supply. Requires external local I/O expansion cable D4-EXCBL-1 or D4-EXCBL-2, purchased separay.
D4-EXDC-2    Local base expansion unit, requires external 125VDC power, no auxiliary device power supply. Requires external local I/O expansion cable D4-EXCBL-1 or D4-EXCBL-2, purchased separay.
D4-EXCBL-1    Base expansion cable, 3.08 ft. (1m)
D4-EXCBL-2    Base expansion cable, 1.54 ft. (0.5m)
DL4basenotes    DL405 I/O Bases
D4-04B-1    4-slot local or expansion base; allows specialty modules in expansion bases when used with D4-450 CPU.
D4-06B-1    6-slot local or expansion base; allows specialty modules in expansion bases when used with D4-450 CPU.
D4-08B-1    8-slot local or expansion base; allows specialty modules in expansion bases when used with D4-450 CPU.
DL4DCInotes    DL405 DC Input Modules
D4-08ND3S    8-point input module 24-48 VDC, sink/source, 8 commons (Isolated), removable terminal
D4-16ND2    16-point 12-24 VDC current sourcing input module, 2 commons (isolated), removable terminal
D4-16ND2F    16-point 12-24 VDC current sourcing input module, fast response (1 ms), 2 commons (isolated), removable terminal
D4-32ND3-1    32-point 24VDC current sinking/sourcing input module, 4 commons (isolated). Requires one connector, sold separay. NOTE: Recommended pre-wired ZIPLink connector cable for this I/O Module is part number ZL-D24-CBL40#; where # designates either 0.5, 1, or 2 meter cable lengths. Accessory cable connector module for ZL-D24-CBL40# cable is part number ZL-RTB40 or ZL-LTB32-24. (Or build a custom cable with ZL-D24-CON-R, ZL-D24-CON-X, ZL-D24-CON or ZL-D24-CBL40#P.)
D4-32ND3-2    32-point 5-15 VDC current sinking/sourcing input module, 4 commons (isolated). Requires one connector, sold separay. NOTE: Recommended pre-wired ZIPLink connector cable for this I/O Module is part number ZL-D24-CBL40#; where # designates either 0.5, 1, or 2 meter cable lengths. Accessory cable connector module for ZL-D24-CBL40# cable is part number ZL-RTB40 or ZL-LTB32-24. (Or build a custom cable with ZL-D24-CON-R, ZL-D24-CON-X, ZL-D24-CON or ZL-D24-CBL40#P.) 
D4-64ND2    64-point 20-28 VDC sourcing input module, 8 commons (isolated). Requires two connectors, sold separay. NOTE: Recommended pre-wired ZIPLink connector cable for this I/O Module is part number ZL-D24-CBL40#; where # designates either 0.5, 1, or 2 meter cable lengths. Accessory cable connector module for ZL-D24-CBL40# cable is part number ZL-RTB40 or ZL-LTB32-24. (Or build a custom cable with ZL-D24-CON-R, ZL-D24-CON-X, ZL-D24-CON or ZL-D24-CBL40#P.)
DL4ACInotes    DL405 AC Input Modules
D4-08NA    8-point 110-220 VAC input module, 2 commons (isolated), removable terminal
D4-16NA    16-point 110VAC input module, 2 commons (isolated), removable terminal
DL4Acombonotes    DL405 AC/DC Input Modules
D4-16NE3    16-point 12-24 VAC/DC current sinking/sourcing input module, 2 commons (isolated), removable terminal
F4-08NE3S    8-point 90-150 VAC/DC current sinking/sourcing isolated input module, 8 commons, removable terminal
DL4DCOnotes    DL405 DC Output Modules
F4-08TD1S    8-point 24-150 VDC current sinking isolated output module, 4 commons (isolated), 2A/point, 12A/module, removable terminal
D4-16TD1    16-point 5-24 VDC current sinking output module, 2 commons (internally connected), 0.5A/point, 3A/common, removable terminal
D4-16TD2    16-point 12-24 VDC current sourcing output module, 2 commons (isolated), 0.5A/point, 3A/common, removable terminal
D4-32TD1    32-point 5-26 VDC current sinking output module, 4 commons (isolated), 0.2A/point, 1.6A/common. Requires one connector, sold separay. NOTE: Recommended pre-wired ZIPLink connector cable for this I/O Module is part number ZL-D24-CBL40#; where # designates either 0.5, 1, or 2 meter cable lengths. Accessory cable connector module for ZL-D24-CBL40# cable is part number ZL-RTB40. (Or build a custom cable with ZL-D24-CON-R, ZL-D24-CON-X, ZL-D24-CON or ZL-D24-CBL40#P.)
D4-32TD1-1    32-point 5-15 VDC current sinking output module, REVERSE LOGIC, 4 commons (isolated), 0.09A/point, 0.72A/common. Requires one connector, sold separay. NOTE: Recommended pre-wired ZIPLink connector cable for this I/O Module is part number ZL-D24-CBL40#; where # designates either 0.5, 1, or 2 meter cable lengths. Accessory cable connector module for ZL-D24-CBL40# cable is part number ZL-RTB40. (Or build a custom cable with ZL-D24-CON-R, ZL-D24-CON-X, ZL-D24-CON or ZL-D24-CBL40#P.) 
D4-32TD2    32-point 12-24 VDC current sourcing output module, 4 commons (isolated), 0.2A/point, 1A/common. Requires one connector, sold separay. NOTE: Recommended pre-wired ZIPLink connector cable for this I/O Module is part number ZL-D24-CBL40#; where # designates either 0.5, 1, or 2 meter cable lengths. Accessory cable connector module for ZL-D24-CBL40# cable is part number ZL-RTB40. (Or build a custom cable with ZL-D24-CON-R, ZL-D24-CON-X, ZL-D24-CON or ZL-D24-CBL40#P.)
D4-64TD1    64-point 5-24 VDC current sinking output module, 8 commons (isolated). Requires two connectors, sold separay. NOTE: Recommended pre-wired ZIPLink connector cable for this I/O Module is part number ZL-D24-CBL40#; where # designates either 0.5, 1, or 2 meter cable lengths. Accessory cable connector module for ZL-D24-CBL40# cable is part number ZL-RTB40. (Or build a custom cable with ZL-D24-CON-R, ZL-D24-CON-X, ZL-D24-CON or ZL-D24-CBL40#P.)
DL4ACOnotes    DL405 AC Output Modules
D4-08TA    8-point 18-220 VAC output module, 2 commons (isolated), 2A/point, 5A/common, removable terminal
D4-16TA    16-point 18-220 VAC output module, 2 commons (isolated), 0.5A/point, 3A/common, removable terminal
DL4RLYnotes    DL405 Relay Output Modules
D4-08TR    8-point 5-30 VDC or 5-250 VAC output module, 8 Form A (SPST) relays, 2 commons (isolated), 2A/point, 5A/common, removable terminal
F4-08TRS-1    8-point 12-30 VDC or 12-250 VAC isolated output module, 4 Form A (SPST) and 4 Form C (SPDT) relays, 8 commons (isolated), 10A/point, 40A/module, removable terminal.
F4-08TRS-2    8-point 12-30 VDC or 12-250 VAC isolated output module, 4 Form A (SPST) relays and 4 Form C (SPDT) relays, 8 commons (isolated), 5A/point, 40A/module, replaceable fuses, removable terminals.
D4-16TR    16-point 5-30 VDC or 5-250 VAC output module, 16 Form A (SPST) relays, 2 commons (isolated), 1A/point, 5A/common, removable terminals.
DL4analognotes    DL405 Analog Modules
F4-04AD    4-channel analog input module, 12-bit resolution, ranges: 0-5V, -5 to +5V, 1-5V, 0-10V, -10 to +10V, 4-20 mA, 0-20 mA
F4-04ADS    4-channel isolated analog input module, 12-bit resolution, ranges: 0-5V, 0-10V, 1-5V, -5 to +5V, -10 to +10V, 0-20 mA, 4-20 mA
F4-08AD    8-channel analog input module, 12-bit resolution, ranges: 1-5V, 0-5V, 0-10V, -5 to +5V, -10 to +10V, 0-20 mA, 4-20 mA
F4-16AD-1    16-channel analog input module, 12-bit resolution, range: 4-20 mA
F4-16AD-2    16-channel analog input module, 12-bit resolution, ranges: 0-5V, 0-10V
F4-04DA-1    4-channel analog output module, 12-bit resolution, range: 4-20 mA. Designed to operate with 24VDC user-supplied power supply.
F4-04DA-2    4-channel analog output module, 12-bit resolution, ranges: 0-5V, 0-10V, -5 to +5V, -10 to +10V
F4-04DAS-1    4-channel analog output module, 16-bit resolution, isolated, range: 4-20 mA current sourcing
F4-04DAS-2    4-channel analog output module, 16-bit resolution, isolated, range: 0-5V, 0-10V
F4-08DA-1    8-channel analog output module, 12-bit resolution, range: 4-20 mA
F4-08DA-2    8-channel analog output module, 12-bit resolution, range: 0-5V, 0-10V
F4-16DA-1    16-channel analog output module, 12-bit resolution, range: 4-20 mA
F4-16DA-2    16-channel analog output module, 12-bit resolution, range: 0-5V, 0-10V
DL4tempnotes    DL405 temperature input modules
F4-08THM    8-channel differential thermocouple module, built-in cold junction compensation, linearization, and burn-out indication. 0.1°C resolution. Can replace all other THM modules; thermocouple type selection is set by jumpers (supports J, E, K, R, S, T, B, N, C). Also supports 0-5 VDC, -5 to +5 VDC, 0-156 mVDC, -156 to +156 mVDC at 16-bit resolution.  
F4-08THM-J    J type 8-channel differential thermocouple module, built-in cold junction compensation, linearization, and burn-out indication. Direct indication in degrees C or degrees F over the full range. (Additional thermocouple types and millivolt ranges available as special order.)
F4-08THM-K    K type 8-channel differential thermocouple module, built-in cold junction compensation, linearization, and burn-out indication. Direct indication in degrees C or degrees F over the full range. (Additional thermocouple types and millivolt ranges available as special order.) Designed to operate with 24VDC user-supplied power supply.
F4-08RTD    8-channel RTD input module, 0.1 degree C resolution, supports: Pt100, jPt100, Cu10, Cu25, and Pt1000
D4-ANLG-M    All DL405 Analog I/O modules, including the Thermocouple Input, are covered in the DL405 Analog I/O Manual. Order separay.
DL4ethremnotes    DL405 Remote I/O
H4-ERM    Ethernet Remote Master Module, master Ethernet remote I/O on a 10Base-T network at 10 Mbps, cable not included. Can be installed in a local base, with a D4-430, D4-440 or D4-450 in the CPU location, or in a local expansion base (D4-450 based system only). Ethernet cable connects to H2/4-EBCs directly or via Ethernet hub(s).
H4-ERM100    Ethernet Remote Master module, for Ethernet remote I/O on a 10/100Base-T network at 10/100 Mbps. Must be installed in a local base with a D4-430, D4-440 or D4-450 in the CPU slot. Ethernet cable (purchased separay) connects to H2/H4/T1H-EBC(100), GS-EDRV100 modules directly or via Ethernet hub(s).
H4-ERM-F    Not recommended for new development. Consider using an H4-ERM100 with Stride media converters or switches with ST or SC fiber. Ethernet Remote Master Module, master Ethernet remote I/O on a 10Base-FL network at 10 Mbps. Can be installed in a local base, with a D4-430, D4-440 or D4-450 in the CPU location, or in a local expansion base (D4-450 based system only). Ethernet cable connects to H2/4-EBC-Fs directly or via 10Base-FL Ethernet hub(s). Cables not included, cables/hubs not available from AutomationDirect.
H4-EBC    Ethernet Base Controller for DL405 Base, supports discrete and analog I/O only. 10Base-T connections at 10 Mbps to Hx-ERM100 or PC-based controllers supporting IP/IPX protocol.
H4-EBC-F    Not recommended for new development. Consider using an H4-EBC with Stride media converters or switches with ST or SC fiber. Ethernet Base Controller for DL405 Base, supports discrete and analog I/O only. Supports 10Base-FL connections at 10 Mbps to Hx-ERM-F or PC-based controllers supporting IP/IPX protocol. Installs in CPU slot only. Cables not included, cables/hubs not available from AutomationDirect.
DL4serremnotes    DL405 serial remote I/O modules
D4-RM    Serial remote I/O master module, remote I/O system is one master (D4-RM) and up to seven slaves (D4-RS) non-removable terminals, uses twisted pairs with overall foil shield (24 AWG minimum)
D4-RS    Serial remote I/O slave unit (used with D4-RM), includes 110/220 VAC power supply, uses twisted pairs with overall foil shield (24 AWG minimum)
D4-RSDC    Serial remote I/O slave unit (used with D4-RM), includes 24 VDC power supply, uses twisted pairs with overall foil shield (24 AWG minimum)
D4-REMIO-M    DL405 serial remote I/O components are covered in the DL405 Remote I/O Manual. Order separay.
DL4commnotes    DL405 Communications and Networking
H4-ECOM-F    Not recommended for new development. Consider using an H4-ECOM100 with Stride media converters or switches with ST or SC fiber. Ethernet Communication Module, master/slave on an Ethernet 10Base-FL network at 10 Mbps. Cables not included, cables/hubs not available from AutomationDirect.
H4-ECOM100    DL405 PLC Systems Ethernet Communications Module, 10/100 Mbps with auto-detect, supports TCP/IP, UDP/IP, IPX and Modbus TCP application layer protocol
H4-ECOM-START    Ethernet Starter Kit, includes: H4-ECOM Ethernet 10Base-T module and manual, PCI Ethernet Adapter card and 10 ft. cable, Demo Software on CD-ROM.
DL4dcmnotes    DL405 serial communications module
D4-DCM    Data Communication Module, master/slave on a Direct NET Network, slave on a Modbus RTU Network, RS-232C/RS-422 communications, cable not included.
D4-DCM-M    DL405 Data Communication Manual. Order manual separay.
DL4masnotes    DL405 Modbus master module
F4-MAS-MB    Modbus Network Master module, Modbus RTU Protocol, provides block read/write and high speed table driven polling, up to 115.2 kbaud, cable not included.
F4-MASMB-M    Modbus Master Manual. Order separay.
DL4BASICnotes    DL405 CoProcessors
F4-CP128-1    Overdrive CoProcessor module, 128k battery backed RAM, 26MHz clock, Port 1: RS-232C/RS-422/RS-485 (115.2 kbaud max.), Port 2: RS-232C/RS-422/RS-485 (57.6 kbaud max.), Port 3: RS-232C (19.2 kbaud max.) uses unused RTS/CTS lines from Port 1. Commander program software for Windows included on CD-ROM.
F4-CP128-R    Not recommended for new development. CoProcessor module, 128k battery backed RAM, 16MHz clock, Port 1: RS-232C/RS-422/RS-485 (115.2 kbaud max.), Port 2: 300/1200/2400 baud radio modem, Port 3: RS-232C (9600 kbaud max.) uses unused RTS/CTS lines from Port 1. Commander programming software for Windows included on CD-ROM.
F4-CP512-1    Not recommended for new development. Overdrive CoProcessor module, 512k battery backed RAM, 26MHz clock, Port 1: RS-232C/RS-422/RS-485, maximum baud 115.2k, Port 2: RS-232C/RS-422/RS-485, maximum baud 19.2k, Port 3: RS-232C, maximum baud 9600 uses unused RTS/CTS lines from Port 1. Commander programming software for Windows included on CD-ROM.
F4-CP128-T    Overdrive CoProcessor module, 128K battery backed RAM, 16Mhz clock, Port 1: RS-232C/RS-422/RS-485, maximum baud 115.2K, Port 2: RS-232C or full-duplex, 300/1200/2400 baud ephone modem, Port 3: RS-232C, maximum baud 9600 on unused RTS/CTS lines from Port 1. Commander programming software for Windows included on CD-ROM.
F4-CP-M    CoProcessor manual, packaged with FA-BASIC-M manual. 
DL4specnotes    DL405 Specialty Modules
DL4pidnotes    DL405 PID module
F4-16PID    PID CoProcessor module, 16 loops, sample rates to 0.1 sec. position/velocity, alarming (configure with DirectSOFT)
F4-16PID-M    DL405 PID CoProcessor manual. Order separay.
DL4ctlnotes    DL405 temperature controller module
F4-4LTC    4-loop Temperature Controller, 4 independent temperature loops, RTD or thermocouple inputs (jumper selectable) and solid-state relay outputs. Includes (1) F4-CT current transformer.
F4-4LTC-M    DL405 4-loop Temperature Controller manual. Order separay.
F4-CT    Current Transformer for use with F4-4LTC to detect heater burnout.
DL4magnotes    DL405 magnetic pulse input module
F4-8MPI    Magnetic Pulse Input Mpdule, 8-point direct input from magnetic pickups, flow totalization, instantaneous flow rate, indicated volume and gross volume calculations in engineering units. K factor and other parameters stored in non-volatile V-memory.
F4-8MPI-M    DL405 Magnetic Pulse Input Manual. Order separay.
DL4intnotes    DL405 interrupt input module
D4-INT    8-point Interrupt Input Module, provides up to 8 prioritized hardware interrupts to the CPU (.067 ms/pt.), inputs not used for interrupts can be used as normal inputs.
D4-INTR-M    DL405 Interrupt Input Manual. Hard copy no longer available; download online at no charge.
DL4hscnotes    DL405 High Speed Counter modules
H4-CTRIO    DL405 High Speed Counter I/O Module, 8 DC sink/source inputs 9-30 VDC, 4 isolated sink/source DC outputs, 5-30 VDC, 1A per point. Inputs supported: 2 quadrature encoder counters up to 100kHz, or 4 single channel counters up to 100kHz, and 4 high speed discrete inputs for Reset, Inhibit, or Capture. Outputs supported: 4 independently configurable high speed discrete outputs or 2 channels pulse output control, 20Hz-25kHz per channel, pulse and direction or cw/ccw pulses.
DL4ctrnotes    DL405 counter I/O module
D4-HSC    High Speed Counter module, quadrature or incrementing/decrementing counter encoding, 7 control inputs, 4 control outputs, count rates to 100kHz and has rate function.
D4-HSC-M    High Speed Counter Manual for D4-HSC. Order separay.
DL4simnotes    DL405 simulator module
D4-16SIM    8/16-point (selectable) input simulator module, for program development/debug. Covered in DL405 User Manual.
D4-INST-M    DL405 Installation and I/O Manual. Covers installation and wiring, plus specifications of all discrete I/O modules.
DL4prognotes    DL405 Programming
D4-HPP-1    RLLPLUS handheld programmer, provides programming, testing and monitoring for all DL405 CPUs, including the D4-450 CPU.
D4-HPCBL-1    DL405 handheld programmer extension cable, 9.24 ft. (3m)
D4-HPCBL-2    Handheld programmer extension cable 4.6ft. (1.5m)
D4-CASCBL    Cassette Interface cable for D4-HPP-1 (DL405 handheld programmer)
D4-HP-M    DL405 Handheld Programmer manual. Order separay.
DL4sparenotes    DL405 Spare Parts and  Accessories
D4-ACC-1    CPU screw/cover kit. Contains 10 spare screws for power strip terminals, 2 power strip terminal jumpers, and plastic covers for the power strip terminals, 15-pin top port, and 25-pin bottom port.
D4-ACC-2    Spare terminal screws for DL405 8-point I/O modules, package of 16
D4-ACC-3    Spare terminal screws for DL405 16-point I/O modules, package of 16
D4-CPUKEY    Spare Keys for all DL405 CPU & D3-HP/HPP, date code 0338 and newer, package of 2
D4-FUSE-2    10A spare fuses for F4-08TRS-2, package of 5
D4-8IOCON    8-point I/O module terminal blocks, package of 5
D4-16IOCON    16-point I/O module terminal blocks, package of 5
D4-IOCVR    I/O module plastic covers, package of 5
D4-FILL    Filler module, used to cover empty base slots
D4-IOCBL-1    I/O cable for 32 or 64-point modules. Pre-wired connector and cable with pigtail, 3m length.
P2000    Productivity2000 Controller CPU and Expansion Modules
P2-550    Productivity2000 CPU module, 50 Mbyte user memory, real time clock/calendar, 4 x 10 character OLED display, RS-232 (RJ12) port with Modbus RTU Master/Slave and ASCII In/out protocol(s) at up to 115.2 kbaud, RS-485 (3-wire terminal block) port with Modbus RTU Master/Slave and ASCII In/out protocol(s) at up to 115.2 kbaud rate, Ethernet (RJ45) port with EtherNet/IP Scanner/Adapters, Modbus TCP, programming and monitoring protocol(s) at 10/100 Mbps, Ethernet (RJ45) port with GS Drives via GS-EDRV100 protocol(s) at 10/100 Mbps, microB-USB port with programming and monitoring protocol(s), microSD card slot for program transfer and data logging
P2-START    Productivity2000 starter kit, includes (1) P2-550 CPU, (1) P2-04B 4-slot base, (1) P2-01AC power supply, (1) P2-08SIM input simulator module, (1) P2-08TRS relay output module, (2) P2-FILL slot filler modules, (1) P2-RTB screw type terminal block, (1) P2-RTB-1 spring clamp terminal block, (1) ZL-P2-CBL18 ZIPLink cable, (1) ZL-RTB20 ZIPLink feedthrough connector module, (1) USB-CBL-AMICB6 programming cable, (1) P2-USER-M manual, (1) PS-PGMSW software CD-ROM, (1) MICSD-16G microSD memory card, (1) mini torque screw driver, (1) 3-wire power cable. Battery included. No substitutions of individual part numbers.
MICSD-16G    Productivity2000 memory card, micro-SD, 16 Gbyte, P2-550
P2000    Productivity2000 Controller I/O Bases and Power Supply
P2-04B    Productivity2000 I/O base, 4-slot, DIN rail or flush mounting. Holds power supply, CPU and 4 I/O modules; P2-01AC power supply required.
P2-07B    Productivity2000 I/O base, 7-slot, DIN rail or flush mounting. Holds power supply, CPU and 7 I/O modules; P2-01AC power supply required.
P2-11B    Productivity2000 I/O base, 11-slot, DIN rail or flush mounting. Holds power supply, CPU and 11 I/O modules; P2-01AC power supply required.
P2-15B    Productivity2000 I/O base, 15-slot, DIN rail or flush mounting. Holds power supply, CPU and 15 I/O modules; P2-01AC power supply required.
P2-01AC    Productivity2000 base power supply, 100-240 VAC. One power supply required per base.