2000-SP MAGNEHELIC 壓差計在刻度的右側有一個亮紅色LED,顯示何時達到設定值。 現場可調,12-24伏直流電。 需要MP或HP邊框
Service:Air and non-combustible, compatible gases. (Natural gas option available.)
Wetted Materials:Consult factory.
Housing:Die cast aluminum case and bezel, with acrylic cover. Exterior finish is coated gray to withstand 168 hour salt spray corrosion test.
Accuracy:±2% of full scale (±3% on - 0, -100 Pa, -125 Pa, 10MM and ±4% on - 00,-60 Pa, -6MM ranges), throughout range at 70°F (21.1°C).
Pressure Limits:35 psig (2.41 bar), HP option: 80 psig (5.52 bar).
Overpressure:Relief plug opens at approximately 25 psig (1.72 bar), standard gages only.
Temperature Limits:20 to 140°F. (-6.67 to 60°C).
Size:4" (101.6 mm) diameter dial face.
Mounting Orientation:Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections:1/8" female NPT duplicate high and low pressure taps - one pair side and one pair back.
Weight:1 lb 2 oz (510 g), MP & HP 2 lb 2 oz (963 g).
Standard Accessories:Two 1/8" NPT plugs for duplicate pressure taps, two 1/8" pipe thread to rubber tubing adapter and three flush mounting adapters with screws. (Mounting and snap ring retainer substituted for 3 adapters in MP & HP gage accessories.)
ModelDescription
2000-0-SP Differential pressure gage, range 0-0.50" w.c., with set point indicator.
2001-SP Differential pressure gage, range 0-1" w.c., with set point indicator.
2002-SP Differential pressure gage, range 0-2" w.c., with set point indicator.
2005-SP Differential pressure gage, range 0-5" w.c., with set point indicator.
2010-SP Differential pressure gage, range 0-10" w.c., with set point indicator.