ABB CI626A 3BSE005029R1接口模塊
1.產 品 介 紹
品牌:ABB
型號:ABB CI626A 3BSE005029R1
產品說明:接口模塊
特點:模塊/卡件,控制器,觸摸屏,伺服驅動器
優勢:供應進口原裝,專業停產配件。
快遞方式:國內順豐、德邦、京東快遞包郵,按照實際報價貨期發貨
2.產 品 詳 情 資 料:
ABB CI626A 3BSE005029R1接口模塊當使用99%屏蔽電纜時,系統中的所有本地(CPU和擴展)底板必須牢固地參考同一接地點,否則底板之間的電位差可能會干擾信號傳輸。早期遠程基板版本的用戶警報在早期遠程基板版ABB CI626A 3BSE005029R1和ABB CI626A 3BSE005029R1(及更早)中,有必要移除電纜插入基板的配合電纜的引腳1。這意味著,當使用工廠制造的Y形電纜(ABB CI626A 3BSE005029R1時,必須在將引腳1與其中一個基板一起使用之前,將其從插入遠程基板的陽端斷開。這些底板的定制Y形電纜應使用圖10-20進行制造。遠程底板IC693CHS393F(及更高版本)和IC693CHS 399E(及更新版本)在底板內部進行了更改,無需從配套電纜上拆下銷1。當將工廠制造的Y形電纜與這些底板一起使用時,無需從電纜上拆下銷1。
When using 99% shielded cables all local (CPU and expansion) baseplates in the system must be solidly referenced to the same ground point or a potential difference between baseplates could disturb signal transmission. Alert for Users of Early Remote Baseplate Versions In early remote baseplates versions, ABB CI626A 3BSE005029R1(and earlier) and ABB CI626A 3BSE005029R1 (and earlier), it is necessary to remove pin 1 of the mating cable where the cable plugs into the baseplate. This means that when using a factory made Wye cable, such as IC693CBL300, you must break pin 1 out of the male end where it plugs into the remote baseplate before using it with one of these baseplates. Custom built Wye cables for these baseplates should be built using Figure 10-20.Remote baseplates ABB CI626A 3BSE005029R1 (and later) and ABB CI626A 3BSE005029R1 (and later) have a change inside the baseplate which eliminates the need to remove pin 1 from the mating cable. When using factory made Wye cable with these baseplates, it is not necessary to remove pin 1 from the cable.
3.產 品 展 示
4.關 于 我 們
本篇文章出自瑞昌明盛自動化設備有限公司,轉載請附上此鏈接: