纖維磨耗機

　　騰達試驗儀器廠：

　　一、簡介：

　　纖維磨耗機適用于粒狀木質纖維的篩分和磨損試驗。由振篩系統和磨損系統組成，整機結構簡單操作方便，運行時間可調。

　　1.Brief introduction of fiber abrasion machine:

　　The fiber abrasion machine is suitable for screening and abrasion test of granular wood fiber.Composed of a vibrating screen system and a wear system,the whole structure is simple and easy to operate,ａnd the running time is adjustable.

　　二、結構組成：

　　纖維磨耗機由研磨系統、振篩系統、控制系統和電機組成。

　　2.Structure composition:

　　The fiber abrasion machine is composed of a grinding system,a vibrating screen system,a control system and a motor.

　　三、技術參數：

　　振篩系統

　　★篩孔直徑：4mm（適用直徑為6.5mm粒狀木質纖維）

　　★篩孔直徑：2.8mm（適用直徑為645mm粒狀木質纖維）

　　★振頻：50Hz

　　★振幅：2mm

　　研磨系統：

　　★由進料口、出料口、研磨室、研磨輪等組成

　　★研磨輪寬度4mm,直徑280mm,

　　★研磨室內徑：300mm

　　★研磨輪與研磨室側壁間距：48mm

　　★研磨輪卷曲：長度50mm,寬度15mm,

　　★研磨輪旋轉平面夾角30°.

　　★研磨輪轉速為450±50r/min~

　　3.Technical parameters:

　　Vibrating Screen System

　　★Sieve hole diameter:4mm(applicable to granular wood fiber with a diameter of 6.5mm)

　　★Sieve hole diameter:2.8mm(for granular wood fiber with a diameter of 645mm)

　　★Vibration frequency:50Hz

　　★Amplitude:2mm

　　Grinding system:

　　★Composed of inlet,outlet,grinding chamber,grinding wheel,etc.

　　★Grinding wheel width 4mm,diameter 280mm,

　　★Grinding chamber diameter:300mm

　　★The distance between the grinding wheel and the side wall of the grinding chamber:48mm

　　★Grinding wheel curl:length 50mm,width 15mm,

　　★The angle of rotation of the grinding wheel is 30°.

　　★The grinding wheel speed is 450±50r/min~