ALS1000是一款緊湊型高性能平臺，它是精確的多用途的。它提供了一個小截面，是那些占用空間小并且要求環保的精密應用的頗具成本效益的替代解決方案。一個直線運動導向軸承系統，兩軸的內部電纜管理和高性能無刷伺服電機使得ALS1000平臺成為工業應用的理想選擇，如激光加工、部件制造和其他在生產環境中需要高精度的應用。

ALS1000 機械軸承直驅平臺 | ALS1000 Mechanical-Bearing Direct-Drive Linear Stage | 機械軸承直線電機直驅精密定位直線平臺產品信息

Aerotech ALS1000 Linear Stage
ALS1000 直線電機平臺是一種緊湊的，通用的高性能精密平臺。它具有很小的橫截面，可承受較小的有效載荷，高性能價格比，是需要小底座的、環保的精密應用的理想選擇。

行程：450 mm
定位精度：±1.0μm
負載：50 kg

● 超精密運動所需的直接驅動直線電機
● 長壽命直線運動導向軸承系統
● 兩軸的內部線纜管理系統
● 密封設計，可選配空氣吹掃
● 低成本，小尺寸，高性能的平臺

結構特點
Sealed linear motion guide bearings with integral wipers are incorporated to provide excellent payload capability and long life. Both the metal waycover and tabletop are treated with a hardcoat (Rockwell 62 hardness) that is scratch-resistant and provides outstanding protection in the harshest applications. An optional air-purge fitting is available that allows air to be forced into the body of the stage to create a positive internal pressure that resists particulates from entering the stage. The tabletop utilizes stainless steel Helicoil™ inserts to protect mounting holes against thread wear. Optional stage finishes are available, including electroless nickel plating.

直線電機驅動
Aerotech’s high-power, cog-free, BLMC series linear motor drives the ALS1000. The non-magnetic forcer coil provides high force with zero cogging for super-smooth velocity and position control. This zero cogging design is ideal for applications requiring outstanding contour accuracy and smooth velocity profiling. As with all of Aerotech’s ALS series linear motor stages, the linear motor has zero backlash, no windup, zero friction and outstanding system responsiveness.

The magnetic field of the linear motor is totally self-contained within the U-channel design. Most high-performance applications cannot tolerate the stray magnetic fields generated by flat motor magnet tracks.

電纜管理系統
Extensive R & D has resulted in an optimized cable management system (CMS) that is designed for millions of cycles of maintenance-free operation. In single- and two-axis systems, the CMS is completely internal to the stages, providing a turnkey system. External CMS is available for three-axis systems. Custom configurations are common and are readily available.

高性能
Noncontact linear encoders with micron-level repeatabilities are standard on all ALS1000 series stages. Either a line-driver output or amplified sine-wave output encoder is available. Motor power and feedback signals terminate in the stage endplate allowing for a simple, clean interface.

The optional HALAR factory calibration further increases the standard accuracy and repeatability. Aerotech manufactures a wide range of matching drives and controls to provide a fully integrated and optimized motion solution.