One touch auto zero. · External data hold runction. · External data auto zero function. · External program lock function SETech's Model YD-3513, 3523, 3533 microprocessor based transducer is used for Amplifier or Indicator. The YD-3513, 3523, 3533 has been designed specifically to operate with strain gauge sensor such as Load Cell, Pressure Transducer, LVDT, etc. The setup sequence is simple and quick by using four buttons only. simple operation and compact size.
| | | SPECIFICATIONS | Temperature storage | -10~85℃ | Temperature operating | 0~60℃ | Relay output | AC 125V 0.5A, DC 24V 1A | Transducer current drive | 120mA | Calibration method | Front panel switches | Signal wave form | Square wave(YD-30E only) | Frequency response | 5khz | Low pass filter | 10Hz, 100Hz, 1KHz | Temperature drift | 0.02% FS/℃ | Sampling speed | 20 t/s(YD3533), 100 t/s(YD3523), 1,000 t/s (YD-3513) | Characters displayed | 5 digits | Typical accuracy | ± 0.02% | Polarity indicator | Yes | Decimal Point selection | Push button setup | Display size | 10mm large | Resolution maximum | 99999 | Type | 7segment LED | Input/Output connector | Screw terminals | Weight | 500g | Mounting | Panel mounting | Size | 96mm × 48mm | | | | | | | |