智能制造網APP
智能制造網手機站
智能制造網小程序
智能制造網官微
智能制造網服務號
HCV100-3000系列高精度磁通門電壓傳感器
(HCV100-3000 High- accuracy Fluxgate-effect voltage Sensor Series)
HCV100-3000系列高精度磁通門電壓傳感器的初、次級之間是絕緣的，可用于測量直流、交流和脈沖電壓。
(HCV100-3000 Series High- accuracy Fluxgate-effect voltage Sensor between primary and secondary is insulated, can be used for the measurement of DC, AC and pulse voltage)
| 電氣參數（Electrical characteristics） | ||||||||
| 型號Type | HCV100- 100 | HCV100- 500 | HCV100- 1000 | HCV100- 2000 | HCV100-3000 |
| ||
| Vpn | 額定輸入電壓 Rated input | 100 | 500 | 1000 | 2000 | 4000 | V | |
| Vpm | 測量電壓范圍 Measuring range | 120 | 600 | 1200 | 2400 | 4800 | V | |
| Rp | 輸入內阻 Input resistance | 1.5M | Ω | |||||
| RL | 負載電阻 Load resistance | ≥10 | KΩ | |||||
| Iout | 額定輸出電壓 Rated output voltage | 5 | V | |||||
| Io | 零電壓失調 Zero offset voltage | ＜5 | mV | |||||
| Vc | 電源電壓 Supply voltage | ±15 (±5%) | V | |||||
| Ic | 靜態功耗 Current consumption | ≤50 | mA | |||||
| Iot | 零點溫漂 Thermal drift of Io | -25～+85℃ | <±0.1 | mV/℃ | ||||
| F | 帶寬 Frequency bandwidth(-3dB) | DC～100 | KHz | |||||
| εG | 精度 Accuracy | ±0.1 | % | |||||
| εL | 線性度 Linearity | ±0.05 | % | |||||
| Tr | 響應時間 Response time | ≤20 | μS | |||||
| Vd | 絕緣電壓 Insulation voltage | 6 | KV | |||||
| Ta | 工作溫度 Ambient operating temperature | -25～+85 | ℃ | |||||
| Ts | 儲存溫度 Ambient storage temperature | -40～+100 | ℃ | |||||
| M | 重量 mass | 500 | g | |||||
| 標準Standards | EN50178/IEC61010-1/UL94-Vo/ROHS | |||||||
使用說明Remarks
1、Vp加到+HT端時，Is為正向輸出；初級導體的溫度不得超過100℃。
（Is is positive when the Vp is applied to the terminal +HT. Temperature of the primary conductor shoud not exceed 100℃）
2、 待測電壓從傳感器輸入端接入，即可在輸出端測得電壓大小。（注意：錯誤的接線可能導致傳感器損壞）
（When the voltage will be measured goes through a sensor,the current will be measured at the output end.（Note:The false wiring may result in the damage of the sensor））
3、 傳感器的輸入輸出幅度可根據用戶需要進行適當調節。
（ Adjust according to customer needs ，Custom different rated input and the output of the sensor.）
HCV100-3000.pdf
