 | PROPORTIONAL VALVE ACTUATOR(GEA-55P/100P/250P) | | | Electric Proportional Digital Linear Actuator is intended for the superior actuator raising various force and speed for spinning power of synchronous motor from the devices of appropriate reducing gear and power transportation that Model GEA-55P, 100P, 250P are proper model for Globe Control Valve as Linear type only, and accurate Feed back control function makes more easy to check by indicating valve gauge from 0 to 99% digital way with it's multi functional system.
Robust design and reliable operating which is almost free from maintenance that it can be applicable to Cooling/heating,
Heating ventilation air conditioning and provincial heating and Dynamic harvest system. | | | This Actuator operated with power source 24V(220V) A.C., control signal 0-10V, 2-10V, 4-20mA, can show operating status of valve in digital way and also possible to make sub-output which can be checked electric signal. | | Model | Nominal stroke (mm) | Nominal Force (Nm) | | GEA-55P | 40 | 5500(5.5KN) | | GEA-100P | 70 | 10000(10.0KN) | | GEA-250P | 80 | 25000(25.0KN) | | | | | This is to use for control two-way or three-way of GVS, GXS Series (Bronze Valve), GVF, GXF Series(Cast Iron fringe valve), or other fringe valve for Heating, Ventilation, Heat ventilation air conditioning and Dynamic harvest system. | | Valve | Type | Series(GVF, GXF) | | Two-Way | Single Seat | 10K, 20K | | Three-Way | Mixing, Diverting | 10K, 20K | | | | Model(optional) | GEA
-55P | GEA
-100P | GEA
-250P | | NOMINAL STROKE (mm) | 40 | 70 | 80 | | NOMINAL FORCE (KN) | 5500(5.5) | 10000(10.0) | 25000(25.0) | | OPERATING TIME(Volt) | 60 | 80 | 150 | | OPERATING POWER(V) | AC 24V or AC220V | AC220V ±10% | | FREQUENCY(㎐) | 60 or 50 | | MOTOR SPEED(rpm) | 1800(1550) | 1600 | 1550 | | REGULAR LOAD (A) | 0.86(0.11) | 0.35 | 1 | | CONDENSER (㎌) | 56(1) | 2 | 6 | | POWER CONSUMPTION(VA) | 21(24) | 77 | 220 | | Input Signal | (AC24V: 0~10V, 2~10V, 4~20mA DC Switchable)
(AC220V: 0~10V or 2~10V, 4~20mA DC Selection) | | Output Signal | Output at Order 0～10V or 2～10V or 4～20mA DC Selection | | FND INDICATION | S4-30% ED-600c/hr | | VOLTAGE INDURANCE | 1,000VAC, 50/60Hz , 1min. | | OPERATING TEMP | Operation :-15 ～ 50℃ / Transportation:-30 ～ 65℃ | | MOTOR TEMP | Operation : -15 ~ 50℃ / Transportation : -30 ~ 65℃ | | HUMIDITY | 5 ~ 95% Rh | | HOUSING PROTECTION DEGREE | IP 54 | | CABLE FITTING GRAND | PF½ | | WEIGHT (Kg) | 7 | 8 | 10 |
SAFETY STANDARD : CE(No : EMC2226-04-01)
EMC STANDARD : EN60730-2-14(1997), EN6070-1:2000 GEA-()()P
1) Operating power source for GEA-55P is 24V AC as basic and 220V AC is optional at order.
2) Frequency is 60㎐ as basic 50Hz is optional at order.
3) Optional Control output signal for GEA-55P at order.
Built-in Torque Switch to protect valve and Actuator when overload .
Automatic cognition for 0-99% by auto setting system and available to control within stroke limit.
Available to use upon working condition by analysis of capacity for 100 Steps / 200 Steps
Selectable NC/NO without any special device.
| | |
智能制造網APP
智能制造網手機站
智能制造網小程序
智能制造網官微
智能制造網服務號
