BOWL FEEDER | | | Outline | | In the Hanshin electromagnetic parts feeder, one or two elec-tromagnets are placed on the horizontal around the circumfer-ence. The construction is devised so that just the right force will be applied in the oscillating direction, assuring effective trans-formation of the electromagnetic energy into oscillating energy. Thus, the Hanshin parts feeder offers fast feed and consistent load-carrying capacity. | | | Features | | - Suitable for high speed and high load. - Steady consistent feed. - Fine feeding speed adjustment | | | | | | | (JA-150B) JA-6B | (JA-C230) JA-9C | (JA-C300) JA-12C | (JA-C390) JA-15C | (JA-C460) JA-18C | (JA-C610) JA-24T | Drive source | Magnetic coil | Input Voltage (V) | 100/110 or 200/230 | Input Frequency (Hz) | 50 or 60 | Current capacity (VA) | 100 | 120 | 250 | 400 | 500 | 900 | Coil gap (mm) | 05. ~ 0.7 | Oscillations (OPM) | 6000 / 7200 ( generally full wave ) | Feed direction (R/L) | CW(R) / CCW(L) | Max. Bowl size | Max.dia (mm) | 250 | 370 | 500 | 620 | 760 | 1000 | Max.weight (kg) | 2.5 | 6 | 12 | 20 | 30 | 42 | Machine weight (kg) | 8 | 24 | 40 | 83 | 127 | 220 | Workpiece weight (kg) | 0.8 | 2.5 | 3.0 | 5.0 | 10.0 | 15.0 | Applicable temperature (℃) | 0 ~ 40 | Applicable humidity (%RH) | 10 ~ 90 | Applicable controller | MFC-3 | MFC-6 | Ass'y drawing Down | | | | | | | | | | | | | Structure | | | No | Name | 1 | Coil gap adjustment screw | 2 | Coil & frame assembly | 3 | Bolt gup adjustment bolt | 4 | Coil Bracket | 5 | Pull face bolt | 6 | Pull face assembly | 7 | Strain relief | 8 | Cover | 9 | Top plate | 10 | Coil bracket bolt | 11 | Lead wire | 12 | Spring clamp nut | 13 | Leaf spring | 14 | Upper spring post bolt | 15 | Spring post | 16 | Spring spacer | 17 | Spring clamp | 18 | Spring installation bolt | 19 | Bowl clamp | 20 | Bowl clamp bolt | 21 | Rubber mount | 22 | Lower spring post bolt | 23 | Base | | | | |