產品型號:WR3320
產品簡介:
記錄儀,能紀錄高達140Hz信號,0.2%進紙誤差。
Specifications (Main unit) | |||||||||
Model | WR3320A | WR3320A |
| ||||||
-2H | -4H | -6H | -8H | -1DH | -2DH | -3DH | -4DH |
| |
No. of Cannel | 2 | 4 | 6 | 8 | 1 | 2 | 3 | 4 |
|
Pen motor | GS3310 | GW3310 |
| ||||||
Amplitude | ±20mm | ±40mm |
| ||||||
Recording method | Heat-sensitive paper (Black) and thermal pen |
| |||||||
Circuit form | DC Servo |
| |||||||
Accuracy | Within ±0.5% of full scale (including non-linearity and dead-band) |
| |||||||
Frequency response | 10mmP-P : 0 to 140Hz (+5·-10%) | 20mmP-P : 0 to 60Hz (+5·-10%) |
| ||||||
Reference voltage | 1V (Accuracy ±0.2%) |
| |||||||
Paper feed speed | 5, 10, 25, 50, 100, 250 and 500mm/sec or mm/min |
| |||||||
External synchronization feed (50mm/sec max) |
|
| |||||||
Time marker | One mark every 1 or 10s or 1 or 10min (Accuracy: ±0.1%), and remote control |
| |||||||
Event marker | Push-button operation, or external control (contact closure or TTL signal) | - |
| ||||||
Remote paper feed | Remote paper feed External contact closure or TTL signal |
| |||||||
Remote paper harter | Remote paper feed External contact closure or TTL signal |
| |||||||
Paper rewind | 50mm/sec (Roll paper only) | - |
| ||||||
Annotation printing | Internal printing : Date, time (elapsed or real), and chart speed |
| |||||||
Power requirement | AC 100·117·220·240V ±10%, 50/60Hz | - |
| ||||||
Power consumption * | 250VA | 340VA | 450VA | 560VA | 155VA | 190VA | 240VA | 300VA |
|
Dimensions (mm) | W : 430 x H : 187 common |
| |||||||
199 (D) | 289 (D) | 379 (D) | 450 (D) | 199 (D) | 289 (D) | 379 (D) | 450 (D) |
| |
Weight (approx.) * | 13kg | 17kg | 25kg | 26kg | 12kg | 15kg | 22kg | 22kg |
|
Operating environment | 0 to 45℃, 30 to 85% RH |
|
* Power consumption and weight include pre-amplifiers.
Specifications (Pre-amplifier) | ||
Model | AH3301A | AH3302A |
Maximum sensitivity | 1mV/cm | 0.5mV/cm |
Masurement range | 1, 2, 5, 10, 20, 50, 100, 200, 500mV/cm | 0.5, 1, 2.5, 5, 10, 25, 50, 100, 250mV/cm |
±1% (with respect to 500mV/cm range) | ±1% (with respect to 250mV/cm range) | |
Input resistance | 1MΩ (fixed) | |
Maximum input voltage | DC 500V (including common mode voltage) | |
Sensitivity adjustment | Settable anywhere within full measurement range | |
Calibration voltage | Measurement range x 2 (20mm) | Measurement range x 4 (40mm) |
Zero position | Settable anywhere within full scale | |
CMRR | AC : 120dB | |
Input filter | Built-in (50Hz/60Hz/OFF, switchable) | |
Compatible Pen motor | GS3310 | GW3310 |