工業級Apacer SATA DOM電子盤SDM4 22P180D

The new SDM4 SSD (Solid State Disk) series is available with a 22-pin connector that is oriented at 90 degrees or 180 degrees and is designed for a variety of housing configurations adopted in industrial, embedded, and commercial computers. Supporting SATAII 3.0 Gb/s and read and write speeds up to 165 MB/s and 150MB/s respectively, the SDM4-M SSD offers outstanding reliability based on high-speed SLC (Single Level Cell) flash memory in capacities of 2GB to 64GB and also can work at extended temperatures (-40°C~ 85°C) under harsh operating environment,particularly well-suited for applications such as POS, kiosk, gaming, digital signage, STB, low-cost NB surveillance systems and Thin client.

 
突出顯示
 
22-pin SATA Standard Connector
Global Wear-leveling and Block Management
Built in ATA Secure Erase and S.M.A.R.T. Function
Inligent Power Failure Recovery
TRIM Command Support
 
規格 
 
 
型號 SDM4 22P/180D 
接口 SATA II 3Gb/s 
連接器 22-pin 
NAND閃存類型 SLC 
容量 2GB~64GB 
持續讀取能力(MB/秒) Up to 165 
持續寫入能力(MB/秒) Up to 150 
ECC支持 16 or 24bit/ 1K Bytes 
標準工作溫度 0 ~ + 70  
擴展工作溫度 ( °C ) -40 ~ + 85 
存儲溫度 -40 ~ + 100 
沖擊 50G 
振動 15G 
濕度 5%~95% 
工作電壓 5.0 V ± 5% 
低功耗 Active mode: 333 mA & Idle mode: 95 mA 
尺寸(mm) 45.8x32.8