智能制造網APP
智能制造網手機站
智能制造網小程序
智能制造網官微
智能制造網服務號
MIG/MAG一元化脈沖焊機，包含受控熔滴過渡過程的脈沖電弧工藝。在基礎電流階段中，電源供電將降低到一定水平，使剛好達到穩定狀態，工件表面得到預熱。在脈沖電流階段中，音科機電的電流脈沖可實現精準的焊接材料熔滴分離。這一原理基本上可以消除短路以及伴有的熔滴不受控制的焊接飛濺現象，從而保證整個功率范圍內的焊接音科機電且低飛濺。
廣州音科機電設備有限公司專業銷售奧地利Fronius焊機福尼斯焊機，Fronius福尼斯TPS/i智能平臺焊機系統，Fronius福尼斯TPS/CMT焊機系統，Fronius福尼斯TPS/TS系列焊機，Fronius福尼斯氬弧焊機，Fronius福尼斯手工焊機。
福尼斯焊機Fronius焊機伏能士焊機福尼斯TPS400i
MIG/MAG一元化脈沖焊機，包含受控熔滴過渡過程的脈沖電弧工藝。在基礎電流階段中，電源供電將降低到一定水平，使剛好達到穩定狀態，工件表面得到預熱。在脈沖電流階段中，音科機電的電流脈沖可實現精準的焊接材料熔滴分離。這一原理基本上可以消除短路以及伴有的熔滴不受控制的焊接飛濺現象，從而保證整個功率范圍內的焊接音科機電且低飛濺。
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
Industry Canada RSS
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device
may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
