當前位置：深圳市宏美瑞科技有限公司>>艾法斯>> 6813A 20 GHz Microwave Generator （Export Licence M
| 2945 SERIES | ||
| 2945B | Communication Service Monitor, STD, English | |
| 2948B | Communications Service Monitor | |
| CALFB2945 | Calibration Certificate - 2945B & 2948B | |
| Opt 1 | 600 Ohm Matching Unit | |
| Opt 2 | Analog Systems Card (see note *) | |
| Opt 3 | High Stability OCXO (This Item is Fitted as Standard on 2948B) | |
| Opt 4 | Parallel Interface/Relay Drive (Cannot Be Fitted With Option 5) | |
| Opt 5 | GPIB Interface (Cannot Be Fitted With Option 4) | |
| Opt 6 | Memory Card Drive | |
| Opt 8 | SSB Demodulator | |
| Opt 9 | Occupied Bandwidth Measurement | |
| Opt 10 | NMT Software For 2945B (Requires Option 2 To Be Fitted) | |
| Opt 11 | AMPS Software For 2945B (Requires Option 2 To Be Fitted) | |
| Opt 12 | TACS Software For 2945B (Requires Option 2 To Be Fitted) | |
| Opt 13 | MPT 1327 Software For 2945B (Requires Option 2 To Be Fitted) | |
| Opt 14 | PMRTEST Software For 2945B (Requires Option 2 To Be Fitted) | |
| Opt 15 | EDACS Radio Software For 2945B (Requires Opt 2 To Be Fitted) | |
| Opt 16 | EDACS Repeater Software For 2945B (Req. Opt 2 To Be Fitted) | |
| Opt 18 | LTR For 2945B (Requires Option 2 To Be Fitted) | |
| Opt 21 | Channel Demodulation Filter For 2945B (see note *) | |
| Opt 22 | POCSAG Software For 2945B | |
| Opt 23 | CCITT Filter (Cannot Be Fitted With Option 24) | |
| Opt 24 | CMESS Filter (Cannot Be Fitted With Option 23) | |
| Opt 25 | Avionics For 2948B | |
| Opt 26 | Tone Remote | |
| Opt 29 | Additional Notch Board | |
| Opt 30 | Bail Arm Handle & Front Stowage Cover For 2945B | |
| Opt 31 | IF Output Option | |
| Opt 32 | Internal Battery Pack (2945B Only) (see note *) | |
| * Options 2, 21 & 32 :- Due to Space Constraints any two of these options can be contained within a single | ||
| Instrument, but not all three. | ||
| Extended Standard Warranties for 294X Series | ||
| W2945B/203 | Extended Standard Warranty 36 Months | |
| W2945B/205 | Extended Standard Warranty 60 months | |
| W2948B/203 | Extended Standard Warranty 36 Months | |
| W2948B/205 | Extended Standard Warranty 60 months | |
| Extended Standard Warranties with Calibration for 294X Series | ||
| W2945B/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W2945B/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| W2948B/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W2948B/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| Accessories for 2945B & 2948B Series | ||
| AC1109W | Easyspan II -Windows - USA | |
| 44991/145 | Microphone For 2945B | |
| 46662/571 | Soft Carrying/Operational Case | |
| 46662/616 | Soft Carrying/Operational Case for use with Option 30 | |
| 46662/779 | Soft Carrying Case (Suitable for all 294X, except early units with external battery) | |
| 46880/114 | Service Manual 2945B | |
| 46880/115 | Service Manual 2948B | |
| 46884/648 | Serial Printer Interface Cable 1.5M | |
| 46884/649 | Serial Port To PC Cable 25Way 1.5M | |
| 46884/650 | Serial Port To PC Cable 9Way 1.5M | |
| 46884/728 | Rack Mounting Kit For 2945 | |
| 54112/163 | Transit Case (Hard) For 2945 | |
| 54421/001 | BNC escopic Antenna For 2945 | |
| 54421/002 | Directional Power Head (HF) 1 MHz To 50 MHz For 2945 | |
| 54421/003 | Directional Power Head (VHF/UHF) 25 MHz To 1 GHz, 2945 | |
| 54431/023 | Attenuator, 20dB AF For 2945 | |
| 59000/375 | Memory Card 2M For 2945B Series | |
| 59999/170 | RF Bridge | |
| SECTION 1 - RADIO TEST SET PRODUCTS | ||
| Retrofit Options | Please Refer to Footnotes for Fitting Charges | |
| RTROPT01/2945A | Opt 1 600 Ohm Matching Unit (Fitting Charge B Code A) | |
| RTROPT02/2945A | Analog System Card (Fitting Charge B Code A) | |
| RTROPT03/2945A | High Stability OCXO (Fitting Charge A Code A) | |
| RTROPT04/2945A | Parallel Interface (Cannot Be Fitted With Opt 5) | |
| (Fitting Charge A Code A) | ||
| RTROPT05/2945A | GPIB Interface (Cannot Be Fitted With Opt 4) (Fitting Charge A Code A) | |
| RTROPT06/2945A | Memory Card Drive With Real Time Clock (Fitting Charge A Code A) | |
| RTROPT08/2945A | SSB Demodulator (Fitting Charge C Code A) | |
| RTROPT09/2945A | Occupied Bandwidth Measurement (Fitting Charge A Code A) | |
| RTROPT10/2945A | NMT Cellular (Requires Opt 2) (Fitting Charge A Code A) | |
| RTROPT11/2945A | AMPS Cellular (Requires Opt 2) (Fitting Charge A Code A) | |
| RTROPT12/2945A | TACS Cellular (Requires Opt 2) (Fitting Charge A Code A) | |
| RTROPT13/2945A | MPT1327 Trunking (Requires Opt 2) (Fitting Charge A Code A) | |
| RTROPT14/2945A | PRMTEST (Requires Opt 2) (Fitting Charge A Code A) | |
| RTROPT15/2945A | EDACS Radio Test (Requires Opt 2) (Fitting Charge A Code A) | |
| RTROPT16/2945A | EDACS Repeater Test (Requires Opt 2) (Fitting Charge A Code A) | |
| RTROPT21/2945A | Demodulation Filters (Fitting Charge C Code A) | |
| RTROPT22/2945A | POCSAG Decode (Fitting Charge A Code A) | |
| RTROPT23/2945A | CCITT Filter (Cannot Be Fitted With Opt 24) (Fitting Charge B Code A) | |
| RTROPT24/2945A | CMESS Filter (Cannot Be Fitted With Opt 24) (Fitting Charge B Code A) | |
| RTROPT30/2945A | Bail Arm & Front Panel Stowage Cover (Fitting Charge A Code A) | |
| RTROPT01/2946A | Opt 1 600 Ohm Matching Unit (Fitting Charge B Code A) | |
| RTROPT02/2946A | Analog System Card (Fitting Charge B Code A) | |
| RTROPT03/2946A | High Stability OCXO (Fitting Charge A Code A) | |
| RTROPT04/2946A | Parallel Interface (Cannot Be Fitted With Opt 5) | |
| (Fitting Charge A Code A) | ||
| RTROPT05/2946A | GPIB Interface (Cannot Be Fitted With Opt 4) (Fitting Charge A Code A) | |
| RTROPT06/2946A | Memory Card Drive With Real Time Clock (Fitting Charge A Code A) | |
| RTROPT08/2946A | SSB Demodulator (Fitting Charge C Code A) | |
| RTROPT09/2946A | Occupied Bandwidth Measurement (Fitting Charge A Code A) | |
| RTROPT10/2946A | NMT Cellular (Requires Opt 2) (Fitting Charge A Code A) | |
| RTROPT11/2946A | AMPS Cellular (Requires Opt 2) (Fitting Charge A Code A) | |
| RTROPT12/2946A | TACS Cellular (Requires Opt 2) (Fitting Charge A Code A) | |
| RTROPT13/2946A | MPT1327 Trunking (Requires Opt 2) (Fitting Charge A Code A) | |
| RTROPT14/2946A | PMRTEST (Requires Opt 2) (Fitting Charge A Code A) | |
| RTROPT15/2946A | EDACS Radio Test (Requires Opt 2) (Fitting Charge A Code A) | |
| RTROPT16/2946A | EDACS Repeater Test (Requires Opt 2) (Fitting Charge A Code A) | |
| RTROPT21/2946A | Demodulation Filters (Fitting Charge C Code A) | |
| RTROPT22/2946A | POCSAG Decode (Fitting Charge A Code A) | |
| RTROPT23/2946A | CCITT Filter (Cannot Be Fitted With Opt 24) (Fitting Charge B Code A) | |
| RTROPT24/2946A | CMESS Filter (Cannot Be Fitted With Opt 24) (Fitting Charge B Code A) | |
| RTROPT30/2946A | Bail Arm & Front Panel Stowage Cover (Fitting Charge A Code A) | |
| RTROPT01/2948 | Opt 1 600 Ohm Matching Unit (Fitting Charge B Code A) | |
| RTROPT02/2948 | Analog System Card (Fitting Charge C Code A) | |
| RTROPT04/2948 | Parallel Interface (Cannot Be Fitted With Opt 5) | |
| (Fitting Charge A Code A) | ||
| RTROPT05/2948 | GPIB Interface (Cannot Be Fitted With Opt 4) (Fitting Charge A Code A) | |
| RTROPT06/2948 | Memory Card Drive With Real Time Clock (Fitting Charge A Code A) | |
| RTROPT08/2948 | SSB Demodulator (Fitting Charge C Code A) | |
| RTROPT09/2948 | Occupied Bandwidth Measurement (Fitting Charge A Code A) | |
| RTROPT10/2948 | NMT Cellular (Requires Opt 2) (Fitting Charge A Code A) | |
| RTROPT11/2948 | AMPS Cellular (Requires Opt 2) (Fitting Charge A Code A) | |
| RTROPT12/2948 | TACS Cellular (Requires Opt 2) (Fitting Charge A Code A) | |
| RTROPT13/2948 | MPT1327 Trunking (Requires Opt 2) (Fitting Charge A Code A) | |
| RTROPT14/2948 | PMRTEST (Requires Opt 2) (Fitting Charge A Code A) | |
| RTROPT15/2948 | EDACS Radio Test (Requires Opt 2) (Fitting Charge A Code A) | |
| RTROPT16/2948 | EDACS Repeater Test (Requires Opt 2) (Fitting Charge A Code A) | |
| RTROPT22/2948 | POCSAG Decode (Fitting Charge A Code A) | |
| RTROPT23/2948 | CCITT Filter (Cannot Be Fitted With Opt 24) (Fitting Charge B Code A) | |
| RTROPT24/2948 | CMESS Filter (Cannot Be Fitted With Opt 24) (Fitting Charge B Code A) | |
| RTROPT25/2948 | Avoinics Retrofit (Fitting Charge A Code A) | |
| RTROPT30/2948 | Bail Arm & Front Panel Stowage Cover (Fitting Charge A Code A) | |
| SECTION 1 - RADIO TEST SET PRODUCTS | ||
| Retrofit Options | Please Refer to Footnotes for Fitting Charges | |
| RTROPT01/2945B | Opt 1 600 Ohm Matching Unit (Fitting Charge B Code A) | |
| RTROPT02/2945B | Analog System Card (Fitting Charge B Code A) (see note *) | |
| RTROPT03/2945B | High Stability OCXO (Fitting Charge A Code A) | |
| RTROPT04/2945B | Parallel Interface (Cannot Be Fitted With Opt 5) | |
| (Fitting Charge A Code A) | ||
| RTROPT05/2945B | GPIB Interface (Cannot Be Fitted With Opt 4) (Fitting Charge A Code A) | |
| RTROPT06/2945B | Memory Card Drive With Real Time Clock (Fitting Charge A Code A) | |
| RTROPT08/2945B | SSB Demodulator (Fitting Charge C Code A) | |
| RTROPT09/2945B | Occupied Bandwidth Measurement (Fitting Charge A Code A) | |
| RTROPT10/2945B | NMT Cellular (Requires Opt 2) (Fitting Charge A Code A) | |
| RTROPT11/2945B | AMPS Cellular (Requires Opt 2) (Fitting Charge A Code A) | |
| RTROPT12/2945B | TACS Cellular (Requires Opt 2) (Fitting Charge A Code A) | |
| RTROPT13/2945B | MPT1327 Trunking (Requires Opt 2) (Fitting Charge A Code A) | |
| RTROPT14/2945B | PRMTEST (Requires Opt 2) (Fitting Charge A Code A) | |
| RTROPT15/2945B | EDACS Radio Test (Requires Opt 2) (Fitting Charge A Code A) | |
| RTROPT16/2945B | EDACS Repeater Test (Requires Opt 2) (Fitting Charge A Code A) | |
| RTROPT18/2945B | LTR For 2945B (Requires Option 2 To Be Fitted) (Fitting Charge A Code A) | |
| RTROPT21/2945B | Demodulation Filters (Fitting Charge C Code A) (see note *) | |
| RTROPT22/2945B | POCSAG Decode (Fitting Charge A Code A) | |
| RTROPT23/2945B | CCITT Filter (Cannot Be Fitted With Opt 24) (Fitting Charge B Code A) | |
| RTROPT24/2945B | CMESS Filter (Cannot Be Fitted With Opt 24) (Fitting Charge B Code A) | |
| RTROPT26/2945B | Tone Remote (Fitting Charge A Code A) | |
| RTROPT29/2945B | Additional Distortion Notches Board (Fitting Charge B Code A) | |
| RTROPT30/2945B | Bail Arm & Front Panel Stowage Cover (Fitting Charge A Code A) | |
| RTROPT31/2945B | IF Output Option (Fitting Charge C Code A) | |
| RTROPT01/2948B | Opt 1 600 Ohm Matching Unit (Fitting Charge B Code A) | |
| RTROPT02/2948B | Analog System Card (Fitting Charge C Code A) (see note *) | |
| RTROPT04/2948B | Parallel Interface (Cannot Be Fitted With Opt 5) | |
| (Fitting Charge A Code A) | ||
| RTROPT05/2948B | GPIB Interface (Cannot Be Fitted With Opt 4) (Fitting Charge A Code A) | |
| RTROPT06/2948B | Memory Card Drive With Real Time Clock (Fitting Charge A Code A) | |
| RTROPT08/2948B | SSB Demodulator (Fitting Charge C Code A) | |
| RTROPT09/2948B | Occupied Bandwidth Measurement (Fitting Charge A Code A) | |
| RTROPT10/2948B | NMT Cellular (Requires Opt 2) (Fitting Charge A Code A) | |
| RTROPT11/2948B | AMPS Cellular (Requires Opt 2) (Fitting Charge A Code A) | |
| RTROPT12/2948B | TACS Cellular (Requires Opt 2) (Fitting Charge A Code A) | |
| RTROPT13/2948B | MPT1327 Trunking (Requires Opt 2) (Fitting Charge A Code A) | |
| RTROPT14/2948B | PMRTEST (Requires Opt 2) (Fitting Charge A Code A) | |
| RTROPT15/2948B | EDACS Radio Test (Requires Opt 2) (Fitting Charge A Code A) | |
| RTROPT16/2948B | EDACS Repeater Test (Requires Opt 2) (Fitting Charge A Code A) | |
| RTROPT18/2948B | LTR For 2945B (Requires Option 2 To Be Fitted) (Fitting Charge A Code A) | |
| RTROPT21/2948B | Demodulation Filters (Fitting Charge C Code A) (see note *) | |
| RTROPT22/2948B | POCSAG Decode (Fitting Charge A Code A) | |
| RTROPT23/2948B | CCITT Filter (Cannot Be Fitted With Opt 24) (Fitting Charge B Code A) | |
| RTROPT24/2948B | CMESS Filter (Cannot Be Fitted With Opt 24) (Fitting Charge B Code A) | |
| RTROPT25/2948B | Avoinics Retrofit (Fitting Charge A Code A) | |
| RTROPT26/2948B | Tone Remote (Fitting Charge A Code A) | |
| RTROPT29/2948B | Additional Distortion Notches Board (Fitting Charge B Code A) | |
| RTROPT30/2948B | Bail Arm & Front Panel Stowage Cover (Fitting Charge A Code A) | |
| RTROPT31/2948B | IF Output Option (Fitting Charge C Code A) | |
| * Options 2, 21 & 32 :- Due to Space Constraints any two of these options can be contained within a single | ||
| Instrument, but not all three. | ||
| SECTION 1 - RADIO TEST SET PRODUCTS | ||
| 2310 | ||
| 2310 | 100 MHz To 2.4 GHz TETRA Signal Analyzer | |
| Opt 1 | Enhanced Dynamic Range For Wide Band Noise | |
| CALFB2310 | Calibration Certificate - 2310 | |
| Extended Standard Warranties for 2310 | ||
| W2310/203 | Extended Standard Warranty 36 Months | |
| W2310/205 | Extended Standard Warranty 60 months | |
| Extended Standard Warranties with Calibration for 2310 | ||
| W2310/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W2310/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| Accessories for 2310 | ||
| 46880/081 | Service Manual 2310 | |
| 43129/189 | Standard GPIB Cable, 1M | |
| 43139/042 | RF Cable, 50 Ohm, BNC - BNC, 1.5M | |
| 46662/614 | Soft Carrying Case | |
| 46884/293 | Rack Mounting Kit (With Slides) 480-680 mm Depth | |
| 46884/294 | Rack Mounting Kit (With Slides) 680-840 mm Depth | |
| 46884/560 | Parallel Printer Interface Cable | |
| 46884/650 | Serial Port To PC Cable 9Way 1.5M | |
| 46884/931 | Rack Mounting Kit (Front Handles Only) | |
| 54311/092 | Coaxial Adapter N(M) To BNC(F) | |
| 54311/095 | RF Cable, 50 Ohm, N To N, 1M | |
| 2388 | ||
| 2388 | 1 GHz Active Probe Complete With PSU | |
| Extended Standard Warranties for 2388 | ||
| W2388/203 | Extended Standard Warranty 36 Months | |
| W2388/205 | Extended Standard Warranty 60 months | |
| Extended Standard Warranties with Calibration for 2388 | ||
| W2388/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W2388/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| SECTION 2 - SIGNAL GENERATOR PRODUCTS | ||
| 202X SERIES | ||
| 2023A | Signal Generator 9 KHz To 1.2 GHz | |
| 2023B | Signal Generator 9 KHz To 2.05 GHz | |
| 2025 | Signal Generator 9 KHz To 2.51 GHz | |
| CALFB2023A | Calibration Certificate - 2023A, 2023B & 2025 | |
| Opt 1 | No Attenuator Fitted (Not Avail. With Opt 3, 7 Or 11) | |
| Opt 2 | AC/DC Power Supply | |
| Opt 3 | High Power Option For 2023A (Not Avail. With Opt 1, 7 Or 11) | |
| Opt 3 | High Power Option For 2023B & 2025 (Not Avail. With Opt 1, 7 Or 11) | |
| Opt 4 | Hi-Stability OCXO Crystal | |
| Opt 5 | Rear Exit Kit | |
| Opt 7 | Fast Pulse Modulator (Not Avail. With Opt 1, 3 Or 11) | |
| Opt 9 | Internal Pulse Generator | |
| Opt 10 | Modulation Input Sensitivity (1V/Pk) | |
| Opt 11 | Fast Pulse With High Power (Not Avail. With Opt 1, 3 Or 7) | |
| Opt 12 | SINAD Measurement | |
| Opt 100 | NOAA Internal (Fixed Width) Pulse Generator | |
| Opt 105 | Dedicated SINAD Input | |
| Extended Standard Warranties for 2023A, 2023B & 2025 | ||
| W2023A/203 | Extended Standard Warranty 36 Months | |
| W2023A/205 | Extended Standard Warranty 60 months | |
| W2023B/203 | Extended Standard Warranty 36 Months | |
| W2023B/205 | Extended Standard Warranty 60 months | |
| W2025/203 | Extended Standard Warranty 36 Months | |
| W2025/205 | Extended Standard Warranty 60 months | |
| Extended Standard Warranties with Calibration for 2023A, 2023B & 2025 | ||
| W2023A/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W2023A/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| W2023B/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W2023B/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| W2025/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W2025/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| Accessories for 2023A, 2023B & 2025 | ||
| 43129/189 | Standard GPIB Cable, 1M | |
| 46662/601 | Transit Case For 2023, 2025 | |
| 46662/602 | Carrying Case For 2023, 2025 | |
| 46880/088 | Service Manual 2023A, 2023B & 2025 | |
| 46884/650 | Serial Port To PC Cable 9Way 1.5M | |
| 46884/792 | Front Bracket Handle Rack Mounting Kit For 2023, 2025 | |
| Retrofit Options | Please Refer to Footnotes for Fitting Charges | |
| RTROPT04/2023A | Opt 4 Retrofit Kit For 2023A Series (Fitting Charge B Code A) | |
| RTROPT05/2023A | Opt 5 Retrofit Kit For 2023A Series (Fitting Charge C Code A) | |
| RTROPT09/2023A | Opt 9 Retrofit Kit For 2023A Series (Fitting Charge C Code A) | |
| RTROPT12/2023A | Opt 12 Retrofit Kit For 2023A Series (Fitting Charge C Code A) | |
| SECTION 2 - SIGNAL GENERATOR PRODUCTS | ||
| 2026 SERIES | ||
| 2026A | 2.05 GHz Signal Generator Two Source Version | |
| 2026B | 2.51 GHz Signal Generator Two Source Version | |
| 2026Q | CDMA Interferer | |
| CALFB2026 | Calibration Certificate - 2026A/B (For Two & Three Source) | |
| 2026A-Opt 1 | Third Internal Source For Signal Gen. 2026A (Requires A 2026A) | |
| 2026B-Opt 1 | Third Internal Source For Signal Gen. 2026B (Requires A 2026B) | |
| 2026A-Opt 1 + 118 | Third Internal Source For Signal Gen. 2026A With Fast Pulse | |
| Modulator Option (Requires A 2026A With Opt118 Fitted) | ||
| 2026B-Opt 1 + 118 | Third Internal Source For Signal Gen. 2026B With Fast Pulse | |
| Modulator Option (Requires A 2026B With Opt118 Fitted) | ||
| Opt 3 | Hi-Stability OCXO Crystal | |
| Opt 4 | Rear Exit Kit | |
| Opt 116 | GSM Modulation Emulator (Cannot Be Fitted With Opt 117) | |
| Opt 117 | Bluetooth GSM Modulation Emulator | |
| (Cannot Be Fitted With Opt 116) | ||
| 2026A-Opt 118 | Fast Pulse Modulator For Signal Gen. 2026A (Cannot Be Fitted | |
| To 2026Q) | ||
| Extended Standard Warranties for 2026 Series | ||
| W2026A/203 | Extended Standard Warranty 36 Months | |
| W2026A/205 | Extended Standard Warranty 60 months | |
| W2026AOPT1/203 | Extended Standard Warranty 36 Months | |
| W2026AOPT1/205 | Extended Standard Warranty 60 months | |
| W2026B/203 | Extended Standard Warranty 36 Months | |
| W2026B/205 | Extended Standard Warranty 60 months | |
| W2026BOPT1/203 | Extended Standard Warranty 36 Months | |
| W2026BOPT1/205 | Extended Standard Warranty 60 months | |
| W2026Q/203 | Extended Standard Warranty 36 Months | |
| W2026Q/205 | Extended Standard Warranty 60 months | |
| Extended Standard Warranties with Calibration for 2026 Series | ||
| W2026A/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W2026A/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| W2026B/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W2026B/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| W2026AOPT1/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W2026AOPT1/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| W2026BOPT1/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W2026BOPT1/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| W2026Q/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W2026Q/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| Accessories for 2026 Series | ||
| 43129/189 | Standard GPIB Cable, 1M | |
| 46662/614 | Soft Carrying Case | |
| 46880/077 | Service Manual 2026 | |
| 46880/087 | Service Manual 2026Q | |
| 46880/100 | Service Manual 2026A/B | |
| 46884/293 | Rack Mounting Kit 2026/Q, 480-680 mm Depth | |
| 46884/294 | Rack Mounting Kit 2026/Q, 680-840 mm Depth | |
| 46884/649 | Serial Port To PC Cable 25Way 1.5M | |
| 46884/650 | Serial Port To PC Cable 9Way 1.5M | |
| 46884/931 | Rack Mounting Kit (Front Handles Only) | |
| Retrofit Options | Please Refer to Footnotes for Fitting Charges | |
| RTROPT03/2026A | Opt 3 Retrofit Kit For 2026A Series (Fitting Charge B Code A) | |
| RTROPT116/2026 | Opt 116 Retrofit Kit For 2026 Series (Fitting Charge E Code A) | |
| RTROPT116/2026/4 | Opt 116 Retrofit Kit For 2026 Series Fitted With Opt 4 (Fitting | |
| Charge E Code A) | ||
| RTROPT116/2026A | Opt 116 Retrofit Kit For 2026A/B Series (Fitting Charge E Code A) | |
| RTROPT116/2026A/4 | Opt 116 Retrofit Kit For 2026A/B Series Fitted With Opt 4 (Fitting | |
| Charge E Code A) | ||
| SECTION 2 - SIGNAL GENERATOR PRODUCTS | ||
| 203X, 204X, 205X SERIES & 750C | ||
| 2030 | Signal Generator 10 KHz To 1.35 GHz | |
| 2031 | Signal Generator 10 KHz To 2.7 GHz | |
| 2032 | Signal Generator 10 KHz To 5.4 GHz | |
| 2040 | Signal Generator 10 KHz To 1.35 GHz Low Noise | |
| 2041 | Signal Generator 10 KHz To 2.7 GHz Low Noise | |
| 2042 | Signal Generator 10 KHz To 5.4 GHz Low Noise | |
| 2050 | Signal Generator 10 KHz To 1.35 GHz Digital & Vector Version | |
| 2050T | Signal Generator 10 KHz To 1.35 GHz Adv Dig & Vect For TETRA | |
| 2051 | Signal Generator 10 KHz To 2.7 GHz Digital & Vector Version | |
| 2051T | Signal Generator 10 KHz To 2.7 GHz Adv Dig & Vect For TETRA | |
| 2052 | Signal Generator 10 KHz To 5.4 GHz Digital & Vector Version | |
| 2052T | Signal Generator 10 KHz To 5.4 GHz Adv Dig & Vect For TETRA | |
| CALFB2030 | Calibration Certificate - 2030, 31, 32, 40, 41, 42, 50, 50T, 51, 51T, 52 & 52T | |
| Opt 1 | Second Internal Modulation Oscillator | |
| Opt 2 | Pulse Modulation | |
| Opt 3 | +19dBm Output Level (2030 & 2040 Only) (Not Avail w/ Opt 6) | |
| Opt 5 | GMSK BT 0.3 Modulation (GSM) (203X Series Only) | |
| Opt 6 | Avionics (LLS & VOR) (Needs Opt 1, Cannot Fit With Opt 3) | |
| Opt 8 | RF Profiles & Complex Sweep | |
| Opt 9 | Internal Pulse Generator (Needs Opt 2) (203X Series Only) | |
| Opt 10 | DME Modulator (203X Only; Needs Opt 1 & 6, Not Avail w/ Opt 3 & 5) | |
| Opt 12 | Electronic Attenuator (Not available on 2032, 2042 & 2052, or with Opt 10 DME, | |
| or with Opt 3) | ||
| Opt 105 | DECT Modifier For Option 2 | |
| Opt 112 | External Mod Input 600 Ohm | |
| 750C | NAV-750C (52030/558) VOR/LOC/GS/Comm/Mkr Bench Test Equipment | |
| Extended Standard Warranties for 2030, 2040, 2050 Series & 750C | ||
| W2030/203 | Extended Standard Warranty 36 Months | |
| W2030/205 | Extended Standard Warranty 60 months | |
| W2031/203 | Extended Standard Warranty 36 Months | |
| W2031/205 | Extended Standard Warranty 60 months | |
| W2032/203 | Extended Standard Warranty 36 Months | |
| W2032/205 | Extended Standard Warranty 60 months | |
| W2040/203 | Extended Standard Warranty 36 Months | |
| W2040/205 | Extended Standard Warranty 60 months | |
| W2041/203 | Extended Standard Warranty 36 Months | |
| W2041/205 | Extended Standard Warranty 60 months | |
| W2042/203 | Extended Standard Warranty 36 Months | |
| W2042/205 | Extended Standard Warranty 60 months | |
| W2050/203 | Extended Standard Warranty 36 Months | |
| W2050/205 | Extended Standard Warranty 60 months | |
| W2050T/203 | Extended Standard Warranty 36 Months | |
| W2050T/205 | Extended Standard Warranty 60 months | |
| W2051/203 | Extended Standard Warranty 36 Months | |
| W2051/205 | Extended Standard Warranty 60 months | |
| W2051T/203 | Extended Standard Warranty 36 Months | |
| W2051T/205 | Extended Standard Warranty 60 months | |
| W2052/203 | Extended Standard Warranty 36 Months | |
| W2052/205 | Extended Standard Warranty 60 months | |
| W2052T/203 | Extended Standard Warranty 36 Months | |
| W2052T/205 | Extended Standard Warranty 60 months | |
| SECTION 2 - SIGNAL GENERATOR PRODUCTS | ||
| Extended Warranties for 2030, 2040, 2050 Series & 750C (Continued) | ||
| Extended Standard Warranties with Calibration for 2030, 2040, 2050 Series & 750C | ||
| W2030/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W2030/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| W2031/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W2031/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| W2032/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W2032/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| W2040/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W2040/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| W2041/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W2041/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| W2042/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W2042/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| W2050/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W2050/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| W2050T/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W2050T/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| W2051/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W2051/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| W2051T/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W2051T/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| W2052/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W2052/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| W2052T/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W2052T/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| W750C/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W750C/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| Accessories for 2030, 2040 & 2050 Series & 750C | ||
| 43129/189 | Standard GPIB Cable, 1M | |
| 43139/042 | RF Cable, 50 Ohm, BNC - BNC, 1.5M | |
| 44991/144 | Breakout Box For Multiple Connections On 2050/T | |
| 46662/525 | Transit Case | |
| 46880/047 | Service Manual 2030 Series | |
| 46880/050 | Service Manual 2040 Series | |
| 46880/062 | Service Manual 2050 Series | |
| 46880/078 | Service Manual 2050T Series | |
| 46884/291 | Rack Mounting Kit 2030/40/50 Series With Slides (Short) | |
| 46884/292 | Rack Mounting Kit 2030/40/50 Series With Slides (Long) | |
| 46884/444 | Maintenance Kit For 2030/40/50 Series | |
| 46884/541 | Rack Mounting Kit (Bracket Only) For 2030/40/50 Series | |
| 54112/164 | Carrying Case (Soft) For 2030 Series | |
| 54311/092 | Coaxial Adapter N(M) To BNC(F) | |
| 54311/095 | RF Cable, 50 Ohm, N To N, 1M | |
| 59999/163 | Precision Adapter N(M) - SMA(F) | |
| Retrofit Options | Please Refer to Footnotes for Fitting Charges | |
| RTROPT01/2030 | 2nd Modulation Oscillator Retrofit Kit (Fitting Charge B Code A) | |
| RTROPT12/2030 | Option 12 Retrofit Kit (Fitting Charge C Code A) | |
| RTROPT12/2030/5 | Option 12 Retrofit Kit With Option 5 Fitted (Fitting Charge C Code A) | |
| RTROPT12/2030/9 | Option 12 Retrofit Kit With Option 9 Fitted (Fitting Charge C Code A) | |
| RTROPT12/2040 | Option 12 Retrofit Kit (Fitting Charge C Code A) | |
| RTROPT12/2050 | Option 12 Retrofit Kit (Fitting Charge C Code A) | |
| RTRGSM/2050/7001 | GSM Retrofit - 2050 Series (Fitting Charge D Code A) | |
| RTRGSM/2050/7006 | GSM Retrofit - 2050 Series (Fitting Charge D Code A) | |
| RTRGSM/2050/8001 | GSM Retrofit - 2050 Series (Fitting Charge D Code A) | |
| RTRGSM/2050/8005 | GSM Retrofit - 2050 Series (Fitting Charge D Code A) | |
| RTRVOR/2030 | Avionics VOR Index Upgrade Kit (Fitting Charge B Code A) | |
| SECTION 2 - SIGNAL GENERATOR PRODUCTS | ||
| 3002 | ||
| 3002 | 10 KHz To 2.4 GHz Signal Generator With High Power Attenuator | |
| Opt 11 | Opt.11 Fast Pulse | |
| Extended Standard Warranties for 3002 | ||
| W3002/203 | Extended Standard Warranty 36 Months | |
| W3002/205 | Extended Standard Warranty 60 months | |
| Extended Standard Warranties with Calibration for 3002 | ||
| W3002/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W3002/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| SECTION 2 - SIGNAL GENERATOR PRODUCTS | ||
| 341X SERIES | ||
| 3412 + Opt 1 | 2GHz Signal Generator With Ext IQ Modulation (No. Attenuator) | |
| 3412 + Opt 2 | 2GHz Signal Generator With Ext IQ Modulation (Mechanical Attenuator) | |
| 3412 + Opt 3 | 2GHz Signal Generator With Ext IQ Modulation (Electronic Attenuator) | |
| 3413 + Opt 1 | 3GHz Signal Generator With Ext IQ Modulation (No. Attenuator) | |
| 3413 + Opt 2 | 3GHz Signal Generator With Ext IQ Modulation (Mechanical Attenuator) | |
| 3413 + Opt 3 | 3GHz Signal Generator With Ext IQ Modulation (Electronic Attenuator) | |
| 3414 + Opt 1 | 4GHz Signal Generator With Ext IQ Modulation (No. Attenuator) | |
| 3414 + Opt 3 | 4GHz Signal Generator With Ext IQ Modulation (Electronic Attenuator) | |
| 3416 + Opt 1 | 6GHz Signal Generator With Ext IQ Modulation (No. Attenuator) | |
| 3416 + Opt 3 | 6GHz Signal Generator With Ext IQ Modulation (Electronic Attenuator) | |
| Opt 5 | Dual ARB (Not available with Opt 8) | |
| Opt 6 | Fast Pulse Modulator (Not available with Opt 9) | |
| Opt 7 | Rear Panel Outputs | |
| Opt 8 | Real Time Baseband RTBB (Not available with Opt 5 or 9) | |
| Opt 9 | Differential I/Q Outputs (Not available with Opt 6) | |
| Opt 10 | List Mode (Not available with Opt 2). | |
| Opt 20 | 2G CDMA Licence (Requires Option 5) | |
| Opt 21 | 2G & 3G CDMA Licence (Requires Option 5) | |
| Opt 300 | Example waveforms; selection (Requires Opts 5 and 21) | |
| Opt 301 | CDMA example waveforms (Requires Opts 5 and 21) | |
| Opt 302 | Cellular example waveforms (Requires Opt 5) | |
| Opt 303 | PMR example waveforms (Requires Opt 5) | |
| Opt 304 | Avionics example waveforms (Requires Opt 5) | |
| Opt 305 | WLAN example waveforms (Requires Opt 5) | |
| Opt 306 | Salite/Cable example waveforms (Requires Opt 5) | |
| Opt 307 | Digital cordless example waveforms (Requires Opt 5) | |
| Extended Standard Warranties for 3410 Series | ||
| W3412/203 | Extended Standard Warranty 36 Months | |
| W3412/205 | Extended Standard Warranty 60 months | |
| W3413/203 | Extended Standard Warranty 36 Months | |
| W3413/205 | Extended Standard Warranty 60 months | |
| W3414/203 | Extended Standard Warranty 36 Months | |
| W3414/205 | Extended Standard Warranty 60 months | |
| W3416/203 | Extended Standard Warranty 36 Months | |
| W3416/205 | Extended Standard Warranty 60 months | |
| Extended Standard Warranties with Calibration for 3410 Series | ||
| W3412/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W3412/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| W3413/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W3413/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| W3414/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W3414/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| W3416/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W3416/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| Accessories for 3410 Series | ||
| 46880/111 | Service Manual 3410 Series | |
| 46885/138 | Front Panel Rack Mounting Kit | |
| 46662/745 | Soft Carrying Case | |
| 82542 | Breakout Box (for auxilliary connector) | |
| Retrofit Options | Please Refer to Footnotes for Fitting Charges | |
| RTREVM/3410 | Improved EVM Retrofit Kit (Fitting Charge D Code R) | |
| RTROPT05/3410 | Dual Channel ARB Retrofit Kit (Fitting Charge B Code A) | |
| RTROPT06/3410 | Pulse Modulation Retrofit Kit (Fitting Charge C Code R) | |
| RTROPT08/3410 | Real Time Baseband RTBB Retrofit Kit (Fitting Charge B Code A) | |
| RTROPT10/3410 | List Mode Retrofit Kit (Fitting Charge A Code R) (Export Restrictions apply outside | |
| the EU, please contact your Sales Office for details) | ||
| RTROPT21/3410 | 2G & 3G CDMA Licence (Fitting Charge A Code C) | |
| SECTION 3 - S-SERIES PRODUCTS | ||
| SGA SERIES | ||
| SGA-3 | 100 kHz to 3 GHz analog signal generator | |
| SGA-6 | 100 kHz to 6 GHz analog signal generator | |
| SPA-6 | High Power( +30dBm) Amplifier | |
| SCO-6 | RF Combiner( 6GHz ) | |
| SPS-8 | 8 GHz Power Sensor and Power Meter Ap for S-series or PC | |
| Option 001 | FM and AM modulation | |
| Option 003 | High Power (+20 dBm) | |
| Option 004 | Fast Pulse Modulation | |
| Option 005 | Removable Memory | |
| Option 006 | Avionics | |
| Option 007 | Rear panel connectors | |
| CAL17025SGA | ISO 17025 Calibration (Not available if Options 4, or 6 are selected) | |
| CAL17025SGA | ISO 17025 Calibration (Not available if Options 4, or 6 are selected) | |
| Extended Standard Warranties for SGA-3 and SGA-6 | ||
| WSGA3/203 | Extended Standard Warranty 36 Months | |
| WSGA3/205 | Extended Standard Warranty 60 Months | |
| WSGA6/203 | Extended Standard Warranty 36 Months | |
| WSGA6/205 | Extended Standard Warranty 60 Months | |
| Extended Standard Warranties with Calibration for SGA-3 and SGA-6 | ||
| WSGA3/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| WSGA3/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| WSGA6/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| WSGA6/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| Accessories for SGA-3 and SGA-6 | ||
| 43129/189 | 1.5 m GPIB cable | |
| 46662/836 | Soft Carry Case | |
| 46662/835 | Hard Transit Case | |
| 43139/042 | RF double screened cable 50 ohm 1.5 m, BNC (m) | |
| 44991/918T | Hard Disk Drive, Spare | |
| 46885/505 | Rack Mounting Kit (single SGA) | |
| 46885/506 | Rack Mounting Kit (two SGA ) | |
| 54311/095 | RF double screened cable 50 ohm 1 m, type-N (m) | |
| 54311/092 | Coaxial adapter N (m) to SMA (f) | |
| 46880/124 | Service Manual SGA | |
| SGD SERIES | ||
| SGD-3 | 100 kHz to 3 GHz Digital signal generator | |
| SGD-6 | 100 kHz to 6 GHz Digital signal generator | |
| SPA-6 | High Power( +30dBm) Amplifier | |
| SCO-6 | RF Combiner( 6GHz ) | |
| SPS-8 | 8 GHz Power Sensor and Power Meter Ap for S-series or PC | |
| Option 003 | High Power (+20 dBm) | |
| Option 004 | Fast Pulse Modulation | |
| Option 005 | Removable Storage Disk | |
| Option 007 | Rear panel connectors | |
| Arbitrary Waveform Generator options (includes IQ Creator): | ||
| Option 010 | AWG with 128 Msamples memory | |
| Option 011 | AWG with 500 Msamples memory | |
| Option 012 | AWG with 1 Gsamples memory | |
| SECTION 3 - S-SERIES PRODUCTS | ||
| IQCreator enable options | ||
| Option 101 | Waveform creation package - Basic (options 111, 112, 113, 114, 115 & 116) | |
| Option 102 | Waveform creation package - Advanced (options 101, 117, 118 & 119) | |
| Option 111 | 3GPP (GSM, EDGE, EGPRS, EGPRS2, WCDMA, HSPA, HSPA+) | |
| Option 112 | 3GPP2 (CDMA2000, 1xEVDO (0+A)) | |
| Option 113 | TD-SCDMA (3GPP TDD-LCR) | |
| Option 114 | Bluetooth (V.11 + V.21 + EDR + Version 4) | |
| Option 115 | WLAN (a, b, g, n) | |
| Option 117 | LTE FDD | |
| Option 118 | LTE TDD | |
| Option 119 | WLAN 802.11 ac (Requires option 115) | |
| Extended Standard Warranties for SGD-3 and SGD-6 | ||
| WSGD3/203 | Extended Standard Warranty 36 Months | |
| WSGD3/205 | Extended Standard Warranty 60 Months | |
| WSGD6/203 | Extended Standard Warranty 36 Months | |
| WSGD6/205 | Extended Standard Warranty 60 Months | |
| Extended Standard Warranties with Calibration for SGD-3 and SGD-6 | ||
| WSGD/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| WSGD3/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| WSGD6/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| WSGD6/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| Accessories for SGD-3 and SGD-6 | ||
| 43129/189 | 1.5 m GPIB cable | |
| 46662/836 | Soft Carry Case | |
| 46662/835 | Hard Transit Case | |
| 43139/042 | RF double screened cable 50 ohm 1.5 m, BNC (m) | |
| 44991/918T | Hard Disk Drive, Spare | |
| 46885/505 | Rack Mounting Kit (single SGD) | |
| 46885/506 | Rack Mounting Kit (two SGD ) | |
| 54311/095 | RF double screened cable 50 ohm 1 m, type-N (m) | |
| 54311/092 | Coaxial adapter N (m) to SMA (f) | |
| 46880/124 | Service Manual SGD | |
| SVA SERIES | ||
| SVA-6 | 250 kHz to 6 GHz Vector Signal Analyzer | |
| SVA-13 | 250 kHz to 13 GHz Vector Signal Analyzer | |
| SPS-8 | 8 GHz Power Sensor and Power Meter Ap for S-series or PC | |
| Option 005 | Removable Storage Disk | |
| Option 007 | Rear panel connectors | |
| Analysis Options | ||
| Option 150 | Measurement Suite package - Basic(options 152, 102, 103, 104, 106 & 109) | |
| Option 151 | Measurement Suite package - Advanced (options 150, 107, 108 & 110) | |
| Option 152 | 3GPP (GSM, EDGE, EGPRS, EGPRS2, WCDMA, HSPA, HSPA+) Measurement suite | |
| Option 102 | 3GPP2 (CDMA2000, 1xEVDO (0+A)) Measurement suite | |
| Option 103 | WLAN (a, b, g, n) Measurement suite | |
| Option 106 | Bluetooth (V.11 + V.21 + EDR + Version 4) Measurement Suite | |
| Option 107 | LTE FDD Measurement Suite | |
| Option 108 | LTE TDD Measurement Suite | |
| Option 109 | TD-SCDMA (3GPP TDD-LCR) Measurement Suite | |
| Option 110 | WLAN 802.11 ac Measurement suite (Requires Option 103) | |
| SECTION 3 - S-SERIES PRODUCTS | ||
| Extended Standard Warranties for SVA-6 and SVA-13 | ||
| WSVA6/203 | Extended Standard Warranty 36 Months | |
| WSVA6/205 | Extended Standard Warranty 60 Months | |
| WSVA13/203 | Extended Standard Warranty 36 Months | |
| WSVA13/205 | Extended Standard Warranty 60 Months | |
| Extended Standard Warranties with Calibration for SVA-6 and SVA-13 | ||
| WSVA6/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| WSVA6/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| WSVA13/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| WSVA13/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| Accessories for SVA-6 and SVA-13 | ||
| 43129/189 | 1.5 m GPIB cable | |
| 46662/836 | Soft Carry Case | |
| 46662/835 | Hard Transit Case | |
| 43139/042 | RF double screened cable 50 ohm 1.5 m, BNC (m) | |
| 44991/918T | Hard Disk Drive, Spare | |
| 46885/505 | Rack Mounting Kit (single SVA) | |
| 46885/506 | Rack Mounting Kit (two SVA ) | |
| 54311/095 | RF double screened cable 50 ohm 1 m, type-N (m) | |
| 54311/092 | Coaxial adapter N (m) to SMA (f) | |
| 46880/124 | Service Manual SVA | |
| SECTION 4 - SIGNAL ANALYZER PRODUCTS | ||
| 2309, 2310 | ||
| 2309 | 100 MHz To 2.4 GHz FFT Analyzer | |
| 2310 | 100 MHz To 2.4 GHz TETRA Signal Analyzer | |
| Opt 1 | Enhanced Dynamic Range For Wide Band Noise (2310 Only) | |
| CALFB2310 | Calibration Certificate - (2309 & 2310 Only) | |
| Extended Standard Warranties for 2309 & 2310 | ||
| W2309/203 | Extended Standard Warranty 36 Months | |
| W2309/205 | Extended Standard Warranty 60 months | |
| W2310/203 | Extended Standard Warranty 36 Months | |
| W2310/205 | Extended Standard Warranty 60 months | |
| Extended Standard Warranties with Calibration for 2309 & 2310 | ||
| W2309/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W2309/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| W2310/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W2310/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| Accessories for 2309 & 2310 | ||
| 46880/081 | Service Manual 2310 | |
| 46880/091 | Service Manual 2309 | |
| 43129/189 | Standard GPIB Cable, 1M | |
| 43139/042 | RF Cable, 50 Ohm, BNC - BNC, 1.5M | |
| 46662/614 | Soft Carrying Case | |
| 46884/293 | Rack Mounting Kit (With Slides) 480-680 mm Depth | |
| 46884/294 | Rack Mounting Kit (With Slides) 680-840 mm Depth | |
| 46884/560 | Parallel Printer Interface Cable | |
| 46884/650 | Serial Port To PC Cable 9Way 1.5M | |
| 46884/931 | Rack Mounting Kit (Front Handles Only) | |
| 54311/092 | Coaxial Adapter N(M) To BNC(F) | |
| 54311/095 | RF Cable, 50 Ohm, N To N, 1M | |
| 2388 | ||
| 2388 | 1 GHz Active Probe Complete With PSU | |
| Extended Standard Warranties for 2388 | ||
| W2388/203 | Extended Standard Warranty 36 Months | |
| W2388/205 | Extended Standard Warranty 60 months | |
| Extended Standard Warranties with Calibration for 2388 | ||
| W2388/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W2388/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| SECTION 6 - MICROWAVE PRODUCTS | ||
| 68XX SERIES | ||
| 6813A | 20 GHz Microwave Generator (Export Licence May Apply) | |
| 6815A | 46 GHz Microwave Generator (Export Licence May Apply) | |
| 6815AR | 40 GHz Microwave Generator (Export Licence May Apply) | |
| 6821A | 3 GHz Scalar Analyzer | |
| 6822A | 8.4 GHz Scalar Analyzer | |
| 6823A | 20 GHz Scalar Analyzer | |
| 6824A | 24 GHz Scalar Analyzer | |
| 6825A | 46 GHz Scalar Analyzer (Export Licence May Apply) | |
| 6825AR | 40 GHz Scalar Analyzer | |
| 6841A | 3 GHz System Analyzer (With 4.2 GHz Spectrum Analyzer) | |
| 6842A | 8.4 GHz System Analyzer (With 20 GHz Spectrum Analyzer) | |
| 6843A | 20 GHz System Analyzer | |
| 6844A | 24 GHz System Analyzer | |
| 6845A | 46 GHz System Analyzer (Export Licence May Apply) | |
| 6845AR | 40 GHz System Analyzer | |
| 6846A | 8.4 GHz System Analyzer (With 24 GHz Spectrum Analyzer) | |
| 6847A | 20 GHz System Analyzer (With 26.5 GHz Spectrum Analyzer) | |
| 6848A | 3 GHz System Analyzer (With 20 GHz Spectrum Analyzer) | |
| Note: - Where Export licences may be required, please contact the local sales office | ||
| CALFB6800 | Calibration Certificate - 6813A, 15A, 21A, 22A, 23A, 24A, 25A/R, 41A, 42A, 43A, 44A, 45A/R, 46A, 47A, 48A | |
| Opt 2 | Field Replaceable Connector (6813A, 22A, 23A, 24A,42A, 43A, 44A, 46A, 47A only) 2 Req for 684X | |
| Opt 2 | Field Replaceable Connector (6815A/AR, 6825A/AR, 6845A/AR only) 2 Req For 6845A/AR | |
| Opt 10 | 3 GHz 110 dB Attenuator (6821A, 41A, 48A only) | |
| Opt 11 | 20 GHz 70 dB Attenuator (6813A, 22A, 23A, 42A, 43A, 46A, 47A only) | |
| Opt 12 | 24 GHz 90 dB Attenuator (6813A, 22A, 23A, 24A, 42A, 43A, 44A, 46A, 47A only) | |
| Opt 13 | 40GHz 70 dB Attenuator (6815A/AR, 25A/AR, 45A/AR only) | |
| Opt 20 | External Mixer Support (Not With Opt 22 Except With 6841A/6848A) | |
| Opt 22 | Group Delay (6841A, 48A only) | |
| Opt 22 | Group Delay (6842A, 43A, 44A, 45A/AR, 46A, 47A only) | |
| Opt 23 | Modulation (Not With Opt 22) | |
| Opt 24 | Trigger Board Option (681X series only) | |
| Opt 25A | 18GHz Internal Pulse Modulator (6813A, 22A, 23A only) (Export Licence May Apply) | |
| Opt 25B | 40GHz Internal Pulse Modulator (6815A/AR, 24A, 25A/AR only) (Export Licence May Apply) | |
| Opt 30 | 8.4 GHz Higher Output Power Option (6822A, 42A, 46A only) | |
| Opt 30 | 20 GHz Higher Output Power Option (6823A, 43A, 47A only) | |
| Opt 30 | 24 GHz Higher Output Power Option (6824A, 44A only) | |
| Extended Standard Warranties for 6800 Series | ||
| W6813/203 | Extended Standard Warranty 36 Months | |
| W6813/205 | Extended Standard Warranty 60 months | |
| W6815/203 | Extended Standard Warranty 36 months | |
| W6815/205 | Extended Standard Warranty 60 months | |
| W6821/203 | Extended Standard Warranty 36 Months | |
| W6821/205 | Extended Standard Warranty 60 months | |
| W6822/203 | Extended Standard Warranty 36 Months | |
| W6822/205 | Extended Standard Warranty 60 months | |
| W6823/203 | Extended Standard Warranty 36 Months | |
| W6823/205 | Extended Standard Warranty 60 months | |
| W6824/203 | Extended Standard Warranty 36 Months | |
| W6824/205 | Extended Standard Warranty 60 months | |
| W6825/203 | Extended Standard Warranty 36 Months | |
| W6825/205 | Extended Standard Warranty 60 months | |
| W6841/203 | Extended Standard Warranty 36 Months | |
| W6841/205 | Extended Standard Warranty 60 months | |
| W6842/203 | Extended Standard Warranty 36 Months | |
| W6842/205 | Extended Standard Warranty 60 months | |
| W6843/203 | Extended Standard Warranty 36 Months | |
| W6843/205 | Extended Standard Warranty 60 months | |
| W6844/203 | Extended Standard Warranty 36 Months | |
| W6844/205 | Extended Standard Warranty 60 months | |
| SECTION 6 - MICROWAVE PRODUCTS | ||
| Extended Standard Warranties for 6800 Series (Continued) | ||
| W6845/203 | Extended Standard Warranty 36 Months | |
| W6845/205 | Extended Standard Warranty 60 months | |
| W6846/203 | Extended Standard Warranty 36 Months | |
| W6846/205 | Extended Standard Warranty 60 months | |
| W6847/203 | Extended Standard Warranty 36 Months | |
| W6847/205 | Extended Standard Warranty 60 months | |
| W6848/203 | Extended Standard Warranty 36 Months | |
| W6848/205 | Extended Standard Warranty 60 months | |
| Extended Standard Warranties with Calibration for 6800 Series | ||
| W6813/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W6813/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| W6815/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W6815/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| W6821/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W6821/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| W6822/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W6822/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| W6823/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W6823/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| W6824/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W6824/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| W6825/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W6825/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| W6841/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W6841/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| W6842/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W6842/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| W6843/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W6843/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| W6844/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W6844/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| W6845/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W6845/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| W6846/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W6846/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| W6847/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W6847/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| W6848/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W6848/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| RetroFit Options | Please Refer to Footnotes for Fitting Charges | |
| RTROPT25A/6800 | 18GHz Internal Pulse Modulator (6813A, 6822A, 6823A only)(Fitting Charge E, Code R)(Export Licence | |
| May Apply) | ||
| RTROPT25B/6800 | 40GHz Internal Pulse Modulator (6815A/AR, 6824A, 6825A/AR only)(Fitting Charge E, Code R)(Export | |
| Licence May Apply) | ||
| RTROPT23/6800 | FM and Pulse Generator (Not With Opt 22) (Fitting Charge A, Code A) | |
| Note: Please check with the factory before Quoting RTROPT23 if the Retrofit is | ||
| intended for an instrument with a serial number lower than 680001/100. | ||
| Additional hardware may be required for these earlier units. | ||
請輸入賬號
請輸入密碼
請輸驗證碼
以上信息由企業自行提供，信息內容的真實性、準確性和合法性由相關企業負責，智能制造網對此不承擔任何保證責任。
溫馨提示：為規避購買風險，建議您在購買產品前務必確認供應商資質及產品質量。
智能制造網