當前位置：上海塑佳機械設備有限公司>>原料干燥設備>> 模具除濕機
GMD系列模具除濕機主要應用在塑膠成型中,由于模具使用冷凍水來縮短成型周期而產生的結露問題,特別是PET瓶胚射出適用,結露現象是當模具表面溫度低于周圍環境空氣的露點溫度時就會產生水氣,而影響產品質量及生產效率,同時會腐蝕模具表面,從而千萬環境污染.本機采用蜂巢轉輪系統進行除濕作業,確保模具周圍始終維持+5℃～-10℃的低露點空氣環境,不讓模具產生結露現象,也不受季節變化的影響,大幅降低不良率.
GMD series mold dehumidifiers are designed to remove the moisture sweat from condensing on the mold surface,Forming of moisture sweat on the mold sruface is due to the use of chillde water for reducing the molding cycle time,particularly while molding of the PET preforms,TO bring about the moisture sweat on the mold surface is because the mold surface temperature is lower than the dew-point temperature of surrounding air,thus the water vapor comes into being,then causes corrosion of mole and effects quality of molding parts as well as production efficiencies.
| 本機特點 Features | |||||||||||||
| 采用P.I.D溫度控制系統,可精確控制再生溫度. | Adopt P.I.D temperature controller to control regenerative tem perature accurately. | ||||||||||||
| 蜂巢式設計,除濕風干燥度穩定 | Honeycom brotor is used to ensure constant air dehumidifying effect. | ||||||||||||
| 具有馬達超載及逆相報警功能 | Motor overload and phase reverse alarm functions are in cluded. | ||||||||||||
| 具備回風冷卻及過濾功率. | Return air cooling and filtering are in cluded | ||||||||||||
| 延長模具使用壽命,降低腐蝕,降低產品不良率. | inhibit corrosion and prolongs life of the mold,reduce scrap rate. | ||||||||||||
| 在常態的大氣條件下,可常年精確控制濕度. | Under normal atmospheric conditions,the humidity content of air can be controlled exactly all the year round | ||||||||||||
| 可選購可拆式回風收集器,實現密閉循環. | Return air collector is optional. | ||||||||||||
請輸入賬號
請輸入密碼
請輸驗證碼
以上信息由企業自行提供，信息內容的真實性、準確性和合法性由相關企業負責，智能制造網對此不承擔任何保證責任。
溫馨提示：為規避購買風險，建議您在購買產品前務必確認供應商資質及產品質量。
智能制造網