當前位置:上海明宇高壓閥門有限公司>>明宇牌汽水分離器系列>>CF41汽水分離器>> CF41型汽水分離器
CF41型汽水分離器、產品介紹:CF41型汽水分離器,是利用蒸汽流向急劇轉換方式、將蒸汽和蒸汽中含有的懸浮狀水滴分離開,提高了產品質量和生產效率。
1.為蒸汽設備提供高干度蒸汽,送往用汽設備,提高設備的熱效率,降低管道內的沖擊力。
2.并防止水擊,而分離出來的凝結水,由分離器下部的疏水閥排除。
3.UFS2型汽水分離器也適用于從壓縮空氣中分離凝結水。Introduction:CF41 gas and water separator make the steam and water apart through the abrupt change of the direction in which the steam flows,so as to improve the quality and efficiency of its operation.
1.Improve the dry steam of steam equipment to raise the heating efficiency of the equipment and reduce the impact to the pipelines.
2.Prevent water beating;the condensed water separated will be dischaeged from the trap below the separator;
3.Ufs2 gas and water separator os also appropriate for separating the condensed water from the condensed air.
技術參數表 Technological parameter date
Model 產品型號 | Nominal diameter | Connection | Pressure rating(MPa) | Max allowable(℃) | Extermal dimensions(mm)外形尺寸 | |||
L | H1 | H2 | D | |||||
CF11 | 15~20 | Thread螺紋 | 0.01~2.5 | 350 | 130 | 115 | 156 | 螺紋 |
25 | 150 | 155 | 222 | |||||
CF41 | 20~32 | Flange法蘭 | 0.01~2.5 | 350 | 320 | 65 | 100 | 螺紋 |
CF41 | 40~50 | Flange法蘭 | 0.01~2.5 | 350 | 460 | 80 | 140 | 螺紋 |
65 | 490 | 90 | 180 | |||||
CF41 | 80~100 | Flange法蘭 | 0.01~2.5 | 350 | 510 | 110 | 190 | 螺紋 |
CF41 | 125~150 | Flange法蘭 | 0.01~2.5 | 350 | 590 | 145 | 200 | 螺紋 |
UFS1 | 50 | Flange法蘭 | 0.01~2.5 | 350 | 270 | 80 | 260 | DN25法蘭 |
65<, /P> | 310 | 90 | 275 | |||||
UFS2 | 80 | Flange法蘭 | 0.01~2.5 | 350 | 400 | 98 | 330 | DN25法蘭 |
100 | 108 | 108 | ||||||
UFS3 | 150 | Flange法蘭 | 0.01~2.5 | 350 | 450 | 140 | 410 | DN25法蘭 |
200 | 168 | 435 | ||||||
UFS4 | 250 | Flange法蘭 | 0.01~2.5 | 350 | 550 | 203 | 517 | DN25法蘭 |
300 | 230 | 517 |
請輸入賬號
請輸入密碼
請輸驗證碼
以上信息由企業自行提供,信息內容的真實性、準確性和合法性由相關企業負責,智能制造網對此不承擔任何保證責任。
溫馨提示:為規避購買風險,建議您在購買產品前務必確認供應商資質及產品質量。